110 Film Development Reel (Jobo-fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Newer version available. https://www.prusaprinters.org/prints/137370-110-film-development-reel-v2-jobo-fit
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 268
- Wydruki
- 1
- Wyświetlenia
- 2220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version
I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film, specifically for the Jobo processing system, so I designed one specifically to fit Jobo systems. Specifically for the 15xx series tanks.
Obviously this is being offered here so that people can make one for themselves (if you do, please let me know!), but if you would like me to print one for you, I'd be happy to for a reasonable price. Just email me and we can hash out the details.
To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)
This was designed for use with the Jobo 15xx series tanks. It may work with others, but I haven't tested with anything other than the 15xx series.
Print instructions
Print Settings
Printer: MakerFarm Pegasus 10"
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20% overall with some 100% mesh modifiers in a couple places, for durability
Filament: Any PLA White
Notes:
I used a 2mm brim just as a precaution against edge curling.
Post-Printing
Nothing special for post-printing. Just basic removal of the brim (if used). Also, depending on your printer's tolerances, the center hole may be a perfect fit for the Jobo center core rod, or it may need some minor adjustments. All printers tolerances are slightly different in my experience.