1 / 2
Shelf supports and Eurobox hooks for Jobox
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf supports for the Jobox system and hooks for Euroboxes.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 972
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Shelf support
Printed in PETG. No support needed. Print 2 per Jobox.
Screws and Nuts
- 1x DIN 603 M5x20
- 1x M5 nut
- 1x M5 washer
- 2x screws per mount to attach mount to shelf. I used self drilling sheet metal screws.
Angle Iron
For the shelf supports you need an angle iron.

The 80 mm side is used to support the Jobox system. The 120mm side defines how high you can adjust the angle iron. Could be bigger or smaller in some setups.
Eurobox hooks
Printed in PETG. No support needed. Print 2 per Eurobox.
Screws and Nuts
- 1x wood screw with flat head per hook.
I have wooden shelf floors and attached the hooks with standard wood screws.