1 / 2
Jo-APS : An APS film development reel (Jobo-fit) — zdjęcie 1
1 / 2

Jo-APS : An APS film development reel (Jobo-fit)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dev reel for APS format film. Designed to process Advanced Photo System films in a Jobo-style tank

Ocena
5 / 5
Polubienia
23
Pobrania
256
Wydruki
2
Wyświetlenia
1367
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film canisters are very different too, so I also designed a set of "APS Canister Tools" that can be used to open the film gate and wind/unwind the film from the can. Check out my profile to see that project.

Obviously this is being offered on here so that people can make one for themselves (if you do, please let me know!), but if you would like me to print one for you, I'd be happy to for a reasonable priceI'd be happy to for a reasonable price. Just email me and we can hash out the details.

To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)

This was designed for use with the Jobo 15xx series tanks. It may work with others, but I haven't tested with anything other than the 15xx series.


Print Instructions
 

Printer: MakerFarm Pegasus 10

Rafts: None

Supports: None

Resolution: 0.2mm

Print Speed: 40/sec

Infill: 20%

Filament: Any PLA

Nozzle temp: 205°C

Bed temp: 55°C

Notes:
Brim: If you find your print warping/curling at all, a brim will help. I found a brim wasn't necessary, but your situation might be different

Post-Printing:
Nothing special for post-printing. Just basic removal of the brim (if used). Also, depending on your printer's tolerances, the center hole may be a perfect fit for the tank's center core rod, or it may need some minor sanding. All printers tolerances are slightly different in my experience

Tagi