5623 modeli
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Want the same results? Click here to find the filament I use for results like these. This super satisfying fidget can be customized to be any shape or size with the simple adjustment of a number! I have added 9 sizes that are ready for…
katana s desingem Naruto
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
The "Skull" keycap is a bold and edgy design that is sure to add a touch of personality to any keyboard. This 3D printed keycap model features intricate details and a sleek design that captures the essence of the classic skull symbol.…
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
This is a fun little clicker toy for you to enjoy! Please like and boost this project. Thank you. Happy Clicking. For Custom Keycaps: 1. Download the Model and import it into your slicer 2. Add another blank print plate 3. Click and drag…
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
je potřeba prolomit první vrstvu u čepele
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Collapsing Jian This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long The Replaceable Blade Version is available to my Clubs…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
Land Ho! Sail the seas with the help of your Print-In-Place Collapsing Pirate Spyglass! This telescoping spyglass expands to almost 400mm! Print Settings No special settings are required. If you would like to make a 2 color version, you…
Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…
This collapsing Archangel Blade is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Fish with collapsing sword inside. You can use 8x2mm magnets for head attachment. I recommend printing it from petg for better durability. Happy printing!
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
inspired by the popular ones, i made this myself because i want to sell them. make sure your settings are perfect.
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
A Keychain of the Capsule Corp. Logo from Dragon Ball/Dragon Ball Z/Dragon Ball Super Saga's. This model is specifically made for Glow in the Dark elements but can take any color or themo-platics you want. Just keep in mind that different…
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps ! Two snaps attach to the upper and lower mounting points, perfectly centering…
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
I was looking for gifts to print for my friends this holiday season and stumbled upon arielchu 's Pikachu keycap on Thingiverse. In their description they wrote that the model was made by simply adding a low-poly Pikachu model on top of a…
Clever solution to hold up to 5 caps/hats. Easy print. No supports needed.
A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…
Printing Instructions: All of these straps are optimized for 95a shore hardness TPU The simplest explanation of the print settings is that FOR THE CENTER SECTION ONLY you need to set the top and bottom layer count to 0, set the wall count…
This is my silliest design yet, but fun to play with anyways :-) It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket. After printing, inset the 5 parts of the blade into the hilt and close it…
Bottle Opener for Screw & Crown Caps. Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original models on MW…
I increased the height (up to 5.5 cm inside) of the excellent 3D model of Plastic bag roller from Andrey Shayter so that boxing Hand Wraps could be placed in it (or any other wide tape) . Saves a lot of time. Thanks to Andrey Shayter for…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
Collapsible Christmas Tree Fidget Toy Looking for a fun, interactive, and festive addition to your holiday season? This 3D printable Collapsible Christmas Tree Fidget Toy combines the joy of Christmas with the satisfaction of a fidget toy.
This collapsing sword is designed to be printed as one part. The multi-part and the replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
collapsing sword inspired by "3d printing world". you can print the blade separately and slide it in the back.
After some friendly suggestions, I am leaving a ko-fi link here for anyone who wishes to support me, no expectations: https://ko-fi.com/feetoffthetable ***Edit*** - added a flattened point version for anyone who doesn't want a sharp…
A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! I have printed it with 5 layers and the pot was waterproof. I…
This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…
Core One Exhaust Vent Flaps (Gravity-Closing) This is a remix of an existing Core One exhaust vent flap design (found here) , using a dryer-style gravity flap mechanism to help retain chamber heat when the exhaust fans are off. The flaps…
In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다
katana bez loga
This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…
I've reworked this design, which I think is brilliant, so that it fits on the mini's bed. I've kept the same specifications as the original model (mechanical spacing and thicknesses) . I added a few fillets and lightened the final piece a…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Updates 2023-12-01 - Added single corner and half grid bases for even more minimal printing 2023-06-09 - Fixed the 1x3x6u, 7u, and 8u bins. The stabilizer “X” were done wrong. 2023-02-04 - Original post using the Gridfinity v5 spec Also…
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
HairSnaps! HairSnaps is a modular hairband with different attachments, allowing you to customize your band to your own style! There are a couple of different ways to customize your hairband: Ready-made snaps: I've made a couple of…
This is the second version of my previous collapsible Christmas tree design. The first version can be found here: https://www.thingiverse.com/thing:4675040. There are two versions of this Christmas tree: one using the 5-point star as the…
This version of the Rey’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the on/off…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
Printed this on a Sovol SV06 without too many issues. I had stringing between the blade segments so watch out for that. This would be pretty easy to modify for print-in-place, but I wanted to print the blade in a different color. The…
Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
Straight out Hazbin Hotel, m eet Alastor, the enigmatic “Radio Demon”, known for his powerful sorcery and status as one of Hell’s most feared overlords. Once a notorious radio host and serial killer, Alastor’s transition to the afterlife…
Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…
Hi I remixed the Cable Organizer from Memo since it didnt fit my longer sleeved cables well. There are now 10x 18mm gaps and 2x 10mm its still fits well with the small one from Memo into the Alex drawer, of course the bigger bottom ones.…
Print in Place Folding Hanger Designed to fit on smaller machines while being sturdy enough for most clothing items. Changelog : 11/12/21 Release 11/14/21 Update: Curved files have been added. 3/8/25 Update: Removed confusing files,…
A 12 gauge shotgun shell, also known as 12ga or 12G shotshell, is a centerfire shotgun cartridge. Centerfire shotgun shells were designed in the mid 1800s. Includes 4 lengths: 2 3/4in (most common, 2.75in, 61mm), 3in (67mm), 3 1/2in…
This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
Deadpool Collapsing Katana (Print in Place)
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models to find something else you might enjoy! ********** [Update April 4, 2026] if you are looking…
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…
