openGrid Snaps for POLYmount and PolyDryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount your POLYmount to openGrid boards with these directional snaps. Simple install and added workspace flexibility😎.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 3598
- Wydruki
- 0
- Wyświetlenia
- 6066
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Mount your lovely 🥰 POLYmount (or the original PolyDryer wall mount) directly to the 🤩 openGrid wall organization system with these handy directional snaps!
Two snaps attach to the upper and lower mounting points, perfectly centering your fancy POLYmount on the openGrid 📐 and allowing easy repositioning as your workspace needs change:
Simply place the two snaps into your openGrid (check for the correct orientation of these directional snaps)
... and then mount the POLYmount 🤩
The design ensures a secure hold and keeps the clean, modular look of openGrid😎.
Related Model:
Featuring an addictive snap-in mechanism! Check it out: The POLYmount 😎 |
Bonus Material:
Of course you'll find my custom 9x8 openGrid board from the photos with all the CAD resources included in the files section:
... with stylish smooth edges for standalone usage
... and integrated mounting points optimized for 3.5mm Spax T-Star Plus screws
Take the CAD files and adopt it to the grid size you need!
Assembly and Photos
 |  |  |  |  |
|---|
 |  |  |  |  |
|---|
Printing Instructions
Recommended Settings:
Layer Height: 0.2mm
Wall Count: 4 perimeters
Top/Bottom Layers: 5
Infill: 40%
Support: None required
...and ensure your printer is well-calibrated especially for the snap-fit features.
Bill of Materials (BOM)
Hardware Required:
2x M4 nuts
1x M4x10 screw
1x M4x12 screw