Husqvarna automower front wheel security cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is something that not many people will need, but if you happen to have a Husqvarna Automower, model G1, G2, 210C,…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
This is something that not many people will need, but if you happen to have a Husqvarna Automower, model G1, G2, 210C, 220AC, 230ACX or Solar Hybrid you might have experienced that the front wheel falls off due to corrosion of the starlock washer. Likely you will be able to find the wheel itself somewhere in the garden, but the security cover / locking covers and bearing covers are missing. Now you can just print them.
You will need something like this as well: https://www.ebay.nl/itm/5mm-Inner-Diameter-304-Stainless-Steel-Starlock-Internal-Tooth-Washers-50-Pcs/361737575488?ssPageName=STRK%3AMEBIDX%3AIT&\_trksid=p2060353.m2749.l2649
Instruction: take the printed wheel cap, insert the starlock washer (facing correctly), insert the printed 'washer' (it will snap fit), push it over the 5 mm wheel rod, but make sure your bearings are still OK and that both bearing covers are in place before you do so.
Print instructions
Unassociated tags: starlock washer
Category: Replacement Parts Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Resolution: 0.15
Infill: 50%
Notes:
Print (slow) in PETG, use minimal 3 perimeters