Liczymy pasujące modele…
My Automower has always lacked a bit of downforce on the rear wheels – so I designed this spoiler. It fits perfectly on the lid without interfering with normal maintenance or service. I highly recommend printing the spoiler with the fuzzy…
Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…
My mower got stuck in the slopes in the garden in heavy rain with the original wheels. This is a wheel with more grip than the original due to larger spikes. This is a replacement wheel for the Husqvarna Automower that should fits these…
A spare wheel for the Husqvarna Automower 305. Since the originals are too expensive I have drawn this replacement. I hope that it is durable and also copes well with slopes. But that will show over time. Rim and profile are screwed,…
Object description: Grinding fixture for resharpening a Husqvarna Lawnmover Saftey Blade, alternative blades and similar blades for other electric lawnmover types. You can save about 8 Euro = 8 Dollar (at the time of publishing) per…
It is my own desing (no remix). The wheel has been designed to fit an Husquarna Automower 308. Print instructions PETG. The dimensions are set for the cover to hold without glue after treating both parts (wheel + cover) with epoxy (ex:…
Replacement front wheel assembly for Husqvarna Automower. You will need a set of two 626ZZ bearings (6mm inner diameter, 19mm outer diameter). Axle locker can be replaced by a 6mm star lock washer. If you decide to print the locker, make…
This "spike" you can use to fasten the guide wire and/or the perimeter wire for your Automower. It only has 3 sides, because I wanted it to be printable sideways (to strengthen the part). But it works very well anyway. The two last…
this is still a work in progress. but print with abs, ASA or PETG for best results with adaptive layer Hight. The small part is supposed to pressfit on the axel.
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
4 Top and Bottom Layers 20% Infill I printed with Supports and the remove pretty easy from the studs. With these settings these wheels are wider and lighter than the stock wheels. Category: Other
For printing these parts, it is recommended to use PET-G. For greater tightness, print at a speed of 50 mm/s and with an elevated nozzle temperature. Use self-tapping screws (25–35 mm) as shown in the figure. Original tires can be reused…
print parts laying on their side with hole horizontally using PETG or PLA secure using #10x3/4" pan head square drive metal screws straight into the existing wheel tread profit
Please like and post your makes ! Why pay $ 120 for a battery pack while you can do it for less than $ 25 ... And using the same brand of batteries as the original ... For : Husqvarna Automower 105, Automower 305, Automower 308, Automower…
To protect the automower from be stuckt at the trampolin.
This is a toy automower (robot mower) loosely modeled after the Husqvarna 430X. My young daughter is a huge fan and we do the neighborhood tour to look for them everyday back from daycare. I thought I'd print one for her but found no…
Hi ! Here are Heavy Duty replacement Screws intended to secure the charging station to the ground. Print in PETG or ABS because PLA is biodegradable Fill 100% You dont have allen key adapted ? Don't matter, use the Hex side of a bit…
I threw out the original back barrel of the automower and replaced it with a printed part and an ikea RILL 2"/50mm castor. as this got stuck with grass and mud and rusting bearings I replace the original wheel with a tpu wheel sealing two…
This is something that not many people will need, but if you happen to have a Husqvarna Automower, model G1, G2, 210C, 220AC, 230ACX or Solar Hybrid you might have experienced that the front wheel falls off due to corrosion of the…
Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg
The klipper engine bracket for the larger automowers, please measure the center of the axis on the motor to confirm diameter of 25mm before printing I will add a model for the smaller engine in the future
Die Ersatzteile von Husquarna sind sehr teuer, deshalb habe ich ein Vorderrad für den Automower 220AC konstruiert. Druck in PETG mit 0,2mm Layer. Spare parts from Husquarna are expensive, so I designed a spare front wheel for the…
New design of my serie of replacement wheels to fit an Husquarna Automower 308. Also compatible with: - Flymo 1200R Both Wheel and cover were printed in PETG. Removable of the cover through 2 holes from the back with a 3mm shaft. v.3 did…
Roue avant de l'Automower, Husqvarna 305 à partir de 2020, modèle a 4 roues. Le fichier est une roue avant de remplacement. La fixé sur l'axe de l'ancienne roue mettre un roulement ou récupérer celui de l'ancienne roue et fixer sur l'axe…
Updated January 2023 Added 3 wires junction Box Added 4 wires junction Box Added Optional Cover Hi ! Because i didn't have under hand this kind of Gel Junction Box like this http://s.click.aliexpress.com/e/co7QwopK I Made one adapted to…
Soft wheels for Husqvarna Automower Compatibility List 305E Nera 310E Nera 405X Nera 410X Nera 430X Nera 450X Nera 520 550 Problem of original wheels The original wheels cause a lot of noise and vibration when driving over hard surfaces.…
Manual sharpening robotic mower blades—for Husqvarna Mammotion and others blades (0,8 mm). Print direction, see pictures GERMAN Halterung zum manuellen schärfen von Klingen von Rasenmährobotern z. B. für Husqvarna Klingen (0.8 mm) Stehend…
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will…
I Make a bigger turntable cutter
Added groove on wheel and clips on cover. Also added slots for screwdriver to remove cover.
Ein Kumpel hat seinen Rasenmäher Roboter (Husqvarna ACX230) leider mit dem Auto überfahren. Bei der Reparatur ist mir aufgefallen, dass die Radkappen eben nicht nur einen kosmetischen Zweck haben, sondern tatsächlich auch die hinteren…
I recommend using PETG as it has better characteristics more suited to the environment these mowers run in. A lot cheaper than the manufacturer parts which I thought were prohibitively expensive. You should not need any other fittings…
The Husqvarna robotic lawn mower at my work was getting damaged a lot. So I created bumpers to protect it.The Husqvarna robotic lawn mower at my work was getting damaged a lot. So I created bumpers to protect it.
Simple wall hanger for the Automower 415x series (405x). Printed using PETG, 0.20mm Speed settings, 20% infill. Managed to put two pieces on same build plate Prusa Mini+. The model is not a complete replacement for the original wall…
My Automower crashed down a hill and broke the rear sensors. this is a replacement. the original part is made from POM I printed in ABS It is necessary to glue the two big parts with the help of the pin Print instructions Category: Other…
I like to get statictisc about my Automower 310 in Home Assistant . To make that possible i need to have a sensor that can detect if the Automower is in station or not. I found this Parasoll Trådfri door sensor and created an holder for…
A cover for the big "on/off" contact under the Husqvarna mower, to avoid obstacles like apples to turn the mower off unintentional. It should be plug and play. Tested on ultimaker 3 and bambu lab x1c. Tested using PLA, but for long time…
This is a remix of chriswal's design for an Automower's rear sensor column: https://www.thingiverse.com/thing:4630244 The dimensions were slightly wrong for my 330X model so I corrected that. The sensor magnet is sized differently and the…
10\\15mm cut-off disc distance for NERA Automower mowers
Safety Disc replacement for Husqvarna Automower 415X Print it with Prusament PETG
J’avais commandé des roues d’origine, mais les pneus n’ont pas tenu la saison. La tondeuse a un meilleur grip avec ces roues :-) Imprimée sur Prusa XL en 2 matériaux, en Prusament PETG-CF et easyprint TPU pour la roue et en PETG pour la…
# Husqvarna Automower Stock-Width 32mm Terrain Wheels Solid-core terrain wheels designed for Husqvarna Automower robotic mowers operating on slopes, wet grass, soft ground, and uneven terrain. This design preserves the original 32 mm…
# Husqvarna Automower 65mm Terrain Wheels Solid-core terrain wheels designed for Husqvarna Automower robotic mowers operating on steep slopes, wet grass, soft ground, and challenging terrain. With an extra-wide 65 mm profile—more than…
