Supersize Wheel of Husqvarna AM405 (AM415) Automower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutting height was too low in our opinion. This wheel raised the height by 7mm.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will figure out.
The front wheels will have some raisers to, still in progress. Coming soon.
Printed the wheel with MK3S+ in PETG, emblem for wheel nut cover with MK3S+ and MMU2s. Tyre printed with TPU (Sunlu) on Voron 2.4. Is too large for MK3/MK4.
After prints I heated the tyre up to 85°C for 45minutes. Not too hot for hurtiung my fingers, and it could seamlessly be assembled.
Excited about the experiens in the field.
Explore my other Printables: https://www.printables.com/de/@Tritschi