Supersize Wheel of Husqvarna AM405 (AM415) Automower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutting height was too low in our opinion. This wheel raised the height by 7mm.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 50
- Makes
- 0
- Views
- 743
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will figure out.
The front wheels will have some raisers to, still in progress. Coming soon.
Printed the wheel with MK3S+ in PETG, emblem for wheel nut cover with MK3S+ and MMU2s. Tyre printed with TPU (Sunlu) on Voron 2.4. Is too large for MK3/MK4.
After prints I heated the tyre up to 85°C for 45minutes. Not too hot for hurtiung my fingers, and it could seamlessly be assembled.
Excited about the experiens in the field.
Explore my other Printables: https://www.printables.com/de/@Tritschi