1 / 4
Ground Screw for Automower (Husqvarna, Gardena and Other Brands) — zdjęcie 1
1 / 4

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Since I didn't find a model that fit my needs, I decided to design my own screws.

Ocena
5 / 5
Polubienia
154
Pobrania
1183
Wydruki
7
Wyświetlenia
3821
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Longer Version (13.04.2026):


Upon request, I created a longer version that is better suited for loose soil.

Despite its height, this screw can still be printed on the Prusa Mini.

As with all models, no supports are required.

Please note that the screw becomes very wobbly toward the top and should ideally be printed there at a slower speed and with a brim.

The parts have already been printed and tested. They are much better suited for loose soil. Thank you again for the feedback @chavotronic_1141832

Version Mk.2 - shorter (18.05.2025):

I have created a version with a height reduction of 25 mm, as the longer version becomes quite wobbly over the last 20 mm.

The Mk.2 version works just as well and also has a socket in the hex head for a 6 mm Allen key.

However, the difference is that it is slightly tapered so that the wrench fits properly. I have tested different versions. This one works very well.

Like the other versions, it is best to print in PETG with at least 4 perimeters, 100% infill and 0,2mm layer height. No supports required.

A brim is highly recommended.

Step Files are included.

I would be very happy about a Like and a Make.

 

 

--------------------------------------------------------------------------------

 

Printed in PETG without supports. Just slice the file straight up. I printed the parts with 5 perimeters, 100% infill and 0,2mm layer height.

The screws also work for the garage of the Automower.

The grip in the ground is similar to the original screws.

The head of the screw has a diameter of 17mm and a height of 5mm. Maybe the screw will fit other mowers. 

Fits also for Gardena Sileno City 250 (Thanks to Marcin Gościcki).

The screws can also be used for all general gardening and planting work.

And Worx Landroid M700 base (Thanks x1nick).

The total length of the screw is about 127mm.

 

Edit 20.11.2024:

Added a version for better edges in the hexagon.

This version was added because with some printers and high printing speeds, the 6mm Allen key no longer fits at the corners. However, this should be the exception and normally the normal version should work.


Thanks to @chavotronic_1141832

Tagi