"Brightroom" Cart Height Extension sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
7 1/2" height extender inserts/sleeves for the 'Brightroom' 3 tiered utility cart that Target sells.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
These are height extender inserts/sleeves for the 'Brightroom' 3 tiered utility cart that Target sells. They will raise the height of the cart to a total height of 36 1/4" if you only use 1 pair, giving you 13 5/16" of total space between each tier/basket. I only use 1 pair currently, and the 36 1/4" height is perfect for my LACK setup that uses 3 lacks on top of each other (with printer enclosure in the top one), putting the top tier basket almost perfectly flush with the "floor" surface of the third lack in which my printer sits.
If you use 2 pairs, you can get the cart to 42 1/2". They fit really well and don't compromise stability surprisingly. They're strong, and include the same ribs for improved sleeve fitment that the ones that came with the cart use. They also include a center rib inside that provides extra strength.
The FreeCAD file has also been provided if you wanted to adjust the height extension to your needs.
Printed in PETG for strength, PLA+ would also work. I printed mine at 50% infill, vertically with supports on. You can print vertically in either orientation (upside-down or right-side up) but you'll probably need supports either way.