Clark-Y Airfoil Ribs for TM-201 Belgula UAV
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clark Y type airfoil with 11/7% modified chamber for TM-201 Belgula MTO 25kg STOL UAV
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
📝 Description
Scroll down to the Description box and paste this clean, engineering-focused layout:
🛠 Design Overview High-fidelity Clark Y type airfoil section featuring an 11.7% modified chamber, originally developed as a wind tunnel test jig for the TM-201 Belgula 25kg Max Takeoff Weight (MTO) STOL UAV.
Perfect for RC scratch-builders, UAV designers, or aerodynamic display models looking for real-world flight performance and structural integrity.
⚙ Recommended Print Settings:
Material: PETG, ASA, or Lightweight PLA (LW-PLA) for optimal strength-to-weight.
Walls/Perimeters: 1-2 perimeters (if printing hollow/vase mode style) or 3 perimeters for structural ribs.
Infill: 10% to 15% Gyroid (or 0% if using custom slicer modifiers for internal spars).