AC Swing Flap Hinge Repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repairs broken AC swing plate hinges, restoring smooth louver movement and proper airflow without full replacement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Air Conditioner Swing Arm Repair Part
This 3D model is designed to repair a broken indoor unit swing arm where the motor grip or mounting point has failed.
Instead of replacing the entire swing assembly, this repair piece can be installed by creating an appropriately sized opening in the damaged swing arm and securing the part with epoxy adhesive.
The design was created specifically to repair a broken swing arm on a Gree air conditioner indoor unit, but it may also be compatible with other brands and models that use the same dimensions and motor shaft configuration. Please compare the dimensions shown in the photos with your original part before printing.
Features:
Cost-effective alternative to replacing the complete swing mechanism.
Designed for 3D printing.
Can be permanently secured using epoxy adhesive.
Potentially compatible with multiple air conditioner brands using similar dimensions.
Installation:
Remove the damaged swing arm.
Create or enlarge the opening as required to fit the repair insert.
Test-fit the printed part.
Apply a strong epoxy adhesive and secure the repair piece in place.
Allow the adhesive to fully cure before reassembling and operating the air conditioner.