1 / 3
Brush Rest for Water Jars / Pinselablage für Wassergläser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brush Rest for Water Jars / Pinselablage für Wassergläser
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (94)Powiązane
I designed a brush rest for the water jars I use in watercolor painting. The brushes are meant to lie slightly angled downwards. The dimensions of my jars can be seen in the sketch or in the Fusion file. This way, the dimensions can be scaled to other sizes in the slicer or in Fusion if needed.
The rest is printed in TPU and is supported by a ring printed in PLA and inserted into it. For this, the 3mf file contains an M600 command. The ring must be inserted after 5 mm or at layer 25.