Tanos Systainer I T-Loc Organizer / Boxes / Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer boxes for a Tanos Systainer I T-Loc tool case
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Organizer boxes for a Systainer I T-Loc tool case made by Tanos (also relabeled by Festool, Stier, Mirka, etc.). I made these to store screws of different sizes, adapted to the exact screw lengths so it may not fit for everyone, see Photos.
The boxes are (partially) designed to touch the top of the closed case in order to keep everything in place, even when the case is accidentially flipped.
Print Settings
Infill
100%
Notes
Nozzle
The boxes are designed for printing with a 0.5d nozzle because most of the wall widths are 1mm, some that need to be stronger are 1.5mm. However, others will of course work too, but I had print speed optimization in mind.
Supports
Depending on how well your printer is handling bridges (and what layer height you are printing), supports may not be neccessary. Top and middle boxes can always be print without supports