1 / 4
G 1 1/2 union fitting to 38mm (1 1/2'') hose connector — zdjęcie 1
1 / 4

G 1 1/2 union fitting to 38mm (1 1/2'') hose connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connector to attach a 38mm (1 1/2'') hose to a G 1 1/2 male thread. Can be used for a submersible pump or other devices.

Ocena
4,5 / 5
Polubienia
53
Pobrania
545
Wydruki
2
Wyświetlenia
2442
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Use the .3mf files if possible, as the “union fitting nut G 1 1-2.3MF” contains a modifyer to have 100% infill in the critical section of the part. If you print from the stl, make sure the shoulder that holds the hose connector is printed with 100% infill.

Print each part separately. Best to print this from PC. A brim might be usefull.

I Only testet the part with a low pressure submersible pump. Be carefull when using it with high pressure like from a waterpipe.
Print the gasket from flexible filament or use a standard gasket.

The hose connector has reinforcing ribs on the inside, so it won't break easy even when there is some force applied to the hose.

Print settings

union fitting nut G 1 1-2.3MF:
0.1mm layer hight
3 perimieter
20% infill

hose connector 1 1-2'' = 38mm.3MF
0.2mm layer hight
100% infill

Solidworks and .step files are included, so you can adjust the part to your needs if necessary. 

Tagi