1 / 4
G 1 1/2 union fitting to 38mm (1 1/2'') hose connector — image 1
1 / 4

G 1 1/2 union fitting to 38mm (1 1/2'') hose connector

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connector to attach a 38mm (1 1/2'') hose to a G 1 1/2 male thread. Can be used for a submersible pump or other devices.

Rating
4.5 / 5
Likes
53
Downloads
545
Makes
2
Views
2,445
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Use the .3mf files if possible, as the “union fitting nut G 1 1-2.3MF” contains a modifyer to have 100% infill in the critical section of the part. If you print from the stl, make sure the shoulder that holds the hose connector is printed with 100% infill.

Print each part separately. Best to print this from PC. A brim might be usefull.

I Only testet the part with a low pressure submersible pump. Be carefull when using it with high pressure like from a waterpipe.
Print the gasket from flexible filament or use a standard gasket.

The hose connector has reinforcing ribs on the inside, so it won't break easy even when there is some force applied to the hose.

Print settings

union fitting nut G 1 1-2.3MF:
0.1mm layer hight
3 perimieter
20% infill

hose connector 1 1-2'' = 38mm.3MF
0.2mm layer hight
100% infill

Solidworks and .step files are included, so you can adjust the part to your needs if necessary. 

Tags