Artic Liquid Freezer Mount for BC250
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Arctic Liquid Freezer III Pump Mount Bracket for ASRock BC-250
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250
An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly over the VRM, VRAM, and surrounding components — areas that get no active cooling in a standard BC-250 build.
What's included:
Main pump mount bracket (attaches to Arctic Liquid Freezer III pump head)
Left 80mm fan shroud with integrated grille
Right 80mm fan shroud with integrated grille
Compatibility
Motherboard: ASRock BC-250
Cooler: Arctic Liquid Freezer III
Fans: 80mm standard (4x M3 fan screws each)
Why this matters for BC-250 builds
The BC-250 uses a non-standard socket layout with no ILM or retention mechanism. Combined with the fact that SFF cases leave VRM and VRAM with little airflow, the dual fan shrouds make a real thermal difference under sustained load.
Hardware Required
2x M4 heat-set insert (pump attachment)
4x M3 screw (bracket → motherboard)
2x 80mm fan(optinional)
Print Settings
Setting | Value |
|---|---|
Material | ABS or ASA (required) |
Layer height | 0.2mm |
Infill | 80%+ |
Walls | 4 |
Supports | Not required |
Orientation | Flat side down |
⚠ The bracket sits directly on the CPU block which reaches 80°C+ under load. ABS or ASA only — PETG will deform, PLA is not suitable.