Artic Liquid Freezer Mount for BC250
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arctic Liquid Freezer III Pump Mount Bracket for ASRock BC-250
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 192
- Makes
- 0
- Views
- 1,399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250
An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly over the VRM, VRAM, and surrounding components — areas that get no active cooling in a standard BC-250 build.
What's included:
Main pump mount bracket (attaches to Arctic Liquid Freezer III pump head)
Left 80mm fan shroud with integrated grille
Right 80mm fan shroud with integrated grille
Compatibility
Motherboard: ASRock BC-250
Cooler: Arctic Liquid Freezer III
Fans: 80mm standard (4x M3 fan screws each)
Why this matters for BC-250 builds
The BC-250 uses a non-standard socket layout with no ILM or retention mechanism. Combined with the fact that SFF cases leave VRM and VRAM with little airflow, the dual fan shrouds make a real thermal difference under sustained load.
Hardware Required
2x M4 heat-set insert (pump attachment)
4x M3 screw (bracket → motherboard)
2x 80mm fan(optinional)
Print Settings
Setting | Value |
|---|---|
Material | ABS or ASA (required) |
Layer height | 0.2mm |
Infill | 80%+ |
Walls | 4 |
Supports | Not required |
Orientation | Flat side down |
⚠ The bracket sits directly on the CPU block which reaches 80°C+ under load. ABS or ASA only — PETG will deform, PLA is not suitable.