Counting matching models…
A simple, toolless case for the BC250. Who knows how bad the thermals are! Printed in PLA, it's probably fine. The build assumes the center fins of the card have been opened up to accept a fan. BOM BC250 APU Board Flex PSU with…
Presentation This is an ATX mount and its I/O shield for AsRock BC250 board. It fits ATX, micro-ATX and most probably ITX cases. Requires ~31cm length from back to front. 2 variants are available: High-profile variant (22mm high) Active…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
A 3d model of the amd bc250 board, modeled to aid in the design process of a case. Not actually meant to be printed. Including a link to the bc250 community discord https://discord.gg/8eZfFWhczz
ASRock BC250 Complete-ish CAD 3D Model Why Does This Exist? My project required a detailed ASRock BC250 model so I could design custom cooling and enclosure solutions. Every public BC250 model I found was either dimensionally inaccurate…
BC-250 Case modified for LRS-350-12 PSU(and AC-01 Socket), and fan mesh. The difference of v1 and v2. v1 has AC-01 socket on Front Shell. v1.1 update: Improved AC-01 socket fit to Front Shell.(No changes on Rear Shell) v2 has AC-01 socket…
This is a case for BC-250 board-computer, to use it with cheap 12v PSU - from HP server, like HSTNS-PL28 643954-201 (gen6, gen7 - reachable under 10$/10€ in state "like new"/new). It can be 460W, 750W … How to connect this thing to BC250?…
The BC-250 board model features accurate proportions and dimensions. All mounting points precisely match the real board. You don't need to print this model, it's just a sample for body modeling.
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
this adapter allows you to mount a bc250 in place of a motherboard in a standard atx case. only certain cases will work for this, however, as the bc250 overhangs the regular motherboard mounting area. parts needed: 4x m3 heat inserts 3x…
This is a CPU cooler mount for the BC250 board. It takes AM4/AM5 brackets. There are 7 variants to choose from, depending on the height of the washers that are supplied with your cooler : from 6.5 to the original 9mm, from which I started…
UPDATED: v1.3 Added alternative fan sleeve for 3x 120mm fans. Use high pressure ones on the front side. I personally use the default 2 fan version, additional fan is not a big impact, but YMMV. UPDATED: v1.2 Updated front card mounting…
The adapter is printed as four identical parts . Two of them must be mirrored before printing. After assembly, you end up with one adapter per CPU socket corner . Printing Quantity: 4 parts total Mirroring: 2 normal + 2 mirrored Result: 4…
Arctic Liquid Freezer III Mount Bracket with Dual 80mm Fan Shrouds for ASRock BC-250 An upgraded version of my BC-250 AIO mount bracket, now featuring integrated 80mm fan shrouds on both sides. The angled shrouds direct airflow directly…
A case for the BC250 board turned living room PC (more info at https://elektricm.github.io/amd-bc250-docs/ ) There were not many options using SFX PSUs and I wanted something that prioritized airflow while keeping the looks nice for the…
Presentation I developped, as a personnal challenge, a portable case for my bc250. This case is equipped with a 16" flat panel, and can output audio via two 2" fullrange speakers. This project drew some attention, and I've been asked…
Intro When I started with the BC-250 I printed an attractive and compact case that would incorporate a Meanwell LRS-350-12. However, my thermal performance was dreadful and the loud fan of the meanwell was a constant annoyance that was…
I initially started designing my own 200x200x370mm version of this but then came across 3DCatts SFF Mini ITX Steam Machine Case v2 Airflow and they had nailed the design and was only a few centimetres bigger than the design I was working…
This is a remix based off the work created by the very talented morph91 . This remix project would have not been possible without his incredible original model ! This remix is a large overhaul of almost everything from the original model…
A simple clip/holder for the micro-fit 3.0 power connectors on the bc250. First time 3d modeling or posting here so it's not the best but it works. I'm fairly sure no one else has made this, so here's a simple clip/holder for the microfit…
Housing for BC250 with FullATX PSU. A1 mini friendly (179.5x179.5 mm footprint). I used PETG-GF filament. There is no hole for power button in the STEP file, I drilled after printing. For ATX power to work - I used a mod taken from BC250…
Project: Custom ASRock BC-250 ITX Case Design This design is inspired by the BeamCase SFF, a modular ITX case system by BeamCase_Design, and was built from the ground up for the ASRock BC-250 (a PS5 APU-based mining card). While the…
A 3-pieces kit to properly mount your BC250 into a DeepCool CH160 Plus PSU relocated to the bottom of the case 120mm or 140mm fan installed right in front of the BC250, pushing fresh air directly to the VRM and PSU connectors Active VRAM…
ASRock BC250 Crossflow Steam Machine Case Why Does This Exist? I designed this case for my own BC250 Steam Machine build and to fit in the space behind my Hisense U6N television. Many existing BC250 cases point a large fan at the board…
Remixed AM5 mount for BC250 by Gadget (made it 6mm tall instead of 7) for compatibility with ARCTIC Liquid Freezer III Pro. Everything from their description applies, so I pasted it below. "This is a CPU cooler mount for the BC250 board.…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
Dimension model that shows die location and mounting holes
Codename GabeStation3 This is my take on a small-ish case that allows for good cooling of the BC250. The dimensions are approx 325x113x186mm, which means it's a hair under 7L in volume. EDIT: I just realized I didn't make a back case to…
I had to cut off the backplate and add more screwholes because my build area is only 200mm tall. the models back half is 203mm tall. I am printing this right now, i will have the build done and be able to talk about any issues I have. I…
I wanted to use more quiet fans for my Asrock 4U12G case where I have my 12 BC250 computers in. To install this mod you'll first have to drill the 14 metal plugs holding the front panel to the case and remove it. Easiest way to essamble…
⚠ Status: design-complete prototype, not yet fully printed. Geometry validated with PLA test pieces (tube-bend jig, PSU pattern plate, joint samples); the full case has not been printed and assembled yet. Publishing now to gather…
⚠ Status: design-complete prototype, not yet fully printed. The geometry has been validated with PLA test pieces (tube-bend jig, PSU screw pattern, joint samples) but the full case has not been printed and assembled yet. I'm publishing it…
Box for Asrock BC250 + Mean Well LRS-350-12
A Case for the AMD BC250 that fits a fullsize non-modular PSU I used PETG for the Body and TPU for the feet altough you dont really need the feet I made it because i didnt like the other Options available I used M3 Heat inserts (4mm…
I wanted a quick and simple way to test the bc 250 with some leftover parts I already had, an atx psu and 3 x 140mm fans. BOM: 1 x amd bc 250 board 1 x atx psu (mine is coolermaster rs-500-acaa-b1) 3 x 140mm pwm fans (mine are thermalTake…
A partial remix of the "Pixels and Polymer" enclosure for the AMD BC 250. This kit adds a GPU Backplane cooler to the Backplane of the BC250, to cool the Memory Chips better. Backplane cooler i used:…
Generally i dont recommend this build, its over-complicated. But i am working on other case with UHP PSU so maybe that will be less pain to build. Printed on my Voron 2.4 350mm with PETG-CF (yea for main frame you need big printer or just…
FishCase is a desktop case for the AMD BC-250 board. The name comes from the APU’s codename, Cyan Skillfish . It was designed in Onshape and printed and tested on a Bambu Lab X2D. Inside the case the board sits with its power connectors…
bc250 to amd cpu cooler mount recommend to print in ABS. damage may occur from melting if not printed in abs. PETG may work, but I would not recommend it. do NOT print with supports, as it will fill in the mounting holes! recommended to…
change psu size from flex to cprs 185mm*73.5mm*40mm make a hole on front panle for 16mm power botton
a case for the bc250 mining cards. incomplete. designed to be used with artic p12 slim 15mm fans. max cooler clearance is about 90-100mm. Was to be used with the adapter i made for the bc250 mounting holes to original wraith cooler…
3x bc250 to 120mm fan adapter. print in the orientation the STL file is in. model requires that it is printed with supports recommended to print with ABS or at the minimum PETG. if printed in other materials, damage to hardware may occur…
This is case forAsrock Bc250 mining card. İts have space for psu and board.
A small plastic based frame to hold the BC250, PSU, and Power Button in one place. It is not a perfect design and could use some tweaks but works as is and meant to sit in place without being moved much. The BC250 rail should slide in to…
A simple air guide to add a blower fan (such as https://www.aliexpress.com/item/1005008518551439.html?spm=a2g0o.order_list.order_list_main.15.46a21802UmPbic ) to a BC250 and designed to fit inside this case
A case for a BC250 board and a full-size ATX PSU. Note - the main image uses an optional fan grille fron Noctua, this is separate from my design but recommended to protect your fans. Link:…
Not much to say about this, thei are replacement spacers for the back of the board on the BC250, they help to increase pressure on the heatsink, I made them 1 mm thick to increase pressure, going up from 0.5mm, they can be scaled up or…
