1 / 3
Shock Towers for HOSIM X05/X06 ZENO
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Shock Towers for HOSIM X05/X06 ZENO (better)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Front and back shock towers (both same) for the HOSIM X05/X06 ZENO, it may fit other HOSIM 1/10 models im not sure.
These are very strong printed in ASA (stronger than the originals), but if you can id print any RC parts in PA CF or similar.
Print laying flat with supports for best layer strength.
