Cat and Dog Mosaic Bookmarks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multicolor bookmarks inspired by stained glass windows. Also work as a quick test for multicolor printing!
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 65
- Wydruki
- 4
- Wyświetlenia
- 291
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
A quick, sub-1-hour print to test all extruders on the Prusa INDX upgrade for CORE One+.
Print at a 0.2mm layer height with a 0.4mm nozzle.
There are two versions:
4T: Four colors (black outline, white cat/dog + 2 mosaic colors)
8T: Eight colors (black outline, grey cat/dog + 6 mosaic colors)
I recommend printing the outline in black, and the cat/dog body in white/grey/similar neutral color. The 8T version also has white for the eyes, which is then used for some of the tiles - this can be replaced. The remaining colors can be anything vivid you have at home, especially for the 8T version.
If you want to adjust the color scheme or add/remove colors, I suggest using EasyPrint - it's much faster to paint individual mosaic tiles there rather than in PrusaSlice.
You can also print it slightly smaller (tested at 13cm length) - just make sure to leave the original thickness, so that it's printed with at least 3 layers.
Model creation
Original illustration by: @me_just_b
Turned the illustration into an SVG sketch in Adobe Illustrator, then extruded it into a 3D model in Autodesk Fusion. Colors were assigned in EasyPrint.