Cat and Dog Mosaic Bookmarks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multicolor bookmarks inspired by stained glass windows. Also work as a quick test for multicolor printing!
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 65
- Makes
- 4
- Views
- 291
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
A quick, sub-1-hour print to test all extruders on the Prusa INDX upgrade for CORE One+.
Print at a 0.2mm layer height with a 0.4mm nozzle.
There are two versions:
4T: Four colors (black outline, white cat/dog + 2 mosaic colors)
8T: Eight colors (black outline, grey cat/dog + 6 mosaic colors)
I recommend printing the outline in black, and the cat/dog body in white/grey/similar neutral color. The 8T version also has white for the eyes, which is then used for some of the tiles - this can be replaced. The remaining colors can be anything vivid you have at home, especially for the 8T version.
If you want to adjust the color scheme or add/remove colors, I suggest using EasyPrint - it's much faster to paint individual mosaic tiles there rather than in PrusaSlice.
You can also print it slightly smaller (tested at 13cm length) - just make sure to leave the original thickness, so that it's printed with at least 3 layers.
Model creation
Original illustration by: @me_just_b
Turned the illustration into an SVG sketch in Adobe Illustrator, then extruded it into a 3D model in Autodesk Fusion. Colors were assigned in EasyPrint.