1 / 1
Duet 3 Tool Distribution Board Top Cover and 2020 Extrusion Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Including the top cover and a 2020 extrusion mount.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Print with any filament, 0.4mm nozzle, 10%+ infill. In PrusaSlicer, change the print orientation.
- Use 2x10mm countersink M3 screw and 2 M3 T-nuts to mount the support on 2020 extrusion
- Use 1x8mm M3 screw on the top left corner to mount the board to the support
- Use 3x25mm M3 screws for the top cover
- Use 4xM3 Heat-set insert https://www.filastruder.com/collections/jubilee/products/ultrasert-ii-metric-inserts-pack-of-30
Hole size recommendations (M3 Short)
C - Diameter ±0.03: 5.05 mm
D - Diameter ±0.03: 5.31 mm
Minimum Boss Diameter: 11.13 mm
Feel free to remix. Step files are attached licensed under GPL 3.0.