1 / 1
Anycubic Airpure Connector to 70mm Fan adapter. — zdjęcie 1

Anycubic Airpure Connector to 70mm Fan adapter.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connect your exhaust fan directly to your Anycubic resin printer (as long as it has an Airpure port.)

Ocena
0 / 5
Polubienia
3
Pobrania
25
Wydruki
0
Wyświetlenia
141
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I recently picked up an Anycubic Photon P1 printer and discovered it had a neat little keyed port on the back for exhausting resin fumes if you have Anycubics little air filter system.    I already have an exhaust system for my existing printers and wanted to be able to use it with my new printer as well so I tossed this together and mounted it to a 70mm fan and my exhaust hose.    

Printed in Anycubics tough ultra resin at 50 micro layer height and washed and cured according to instruction.    This would probably print with no issues at all on an FDM printer as well with minimal support.

F3D file is included for remixing or tweaking.   Enjoy!

Tagi