MTB helmet screw M6 (Leatt DBX 5.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement screw for Leatt helmet DBX 5.0
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 27
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement screw for Leatt helmet DBX 5.0 since I couldn't find them anywhere.
IMPORTANT! Print the screw vertically, it is supposed to be weak and snap off in a crash! Let the screw break, not your neck...
The printed screw is a little weaker than the originals, but works really well and can be tightened enough with fingerforce.
There are two versions: one with a flat top, and one with a 2.5mm hex hole that runs trough the threaded part for removing(just like in the originals).
I printed mine in Prusa core one plus with prusaslicer 0.10mm profile 3 perimeter layers, and 25mm/s perimeter speeds.