MTB helmet screw M6 (Leatt DBX 5.0)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement screw for Leatt helmet DBX 5.0
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 1
- Views
- 27
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement screw for Leatt helmet DBX 5.0 since I couldn't find them anywhere.
IMPORTANT! Print the screw vertically, it is supposed to be weak and snap off in a crash! Let the screw break, not your neck...
The printed screw is a little weaker than the originals, but works really well and can be tightened enough with fingerforce.
There are two versions: one with a flat top, and one with a 2.5mm hex hole that runs trough the threaded part for removing(just like in the originals).
I printed mine in Prusa core one plus with prusaslicer 0.10mm profile 3 perimeter layers, and 25mm/s perimeter speeds.