Small Pinecil v2 rugged case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
an even shorter version of the pinecil v2 rugged case to store the pinecil and 6 tips.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a shorter version of the "Pinecil v2 Short Tips Rugged Case". By storing the pinecil and its tip side by side instead of assembled I was able to make the box even smaller. Also, it is way harder to accidentally store the pinecil while it is still too hot for the Box this way.
Print settings
The model was printed in PCTG with 10% adaptive cubic infill.
Box and latches: 3 walls.
Inlays: 2 walls.
The seal was printed in TPU.
Assembly
You will need 6 M3x30 screws to assemble (I would recommend ISO 4762)
Additional model sources
The link to the rugged box in the original's description is dead, so I used the "Rugged Box (Parametric)" to generate the shorter box. Like the original, the inlays come from the "Pinecil v2 Short Tips Case" but were shortened to fit the new form factor.