80mm Fan Mount for Perpendicular Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fan mount scaled for an 80mm fan with holes to mount into a perpendicular support or wall.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I just needed a way to mount a fan into the back wall of this cabinet and most fan brackets didn't offer this as an option (at least that I could find). I found this one which has the chunky square part that can let you put screws through in either direction, i.e. parallel or perpendicular to the direction of the air flow. I'm sure a more elegant solution exists but this works like a charm!
Note that I removed the mounting holes for the fan entirely, you can drill them out, as I did, or place cylindrical negative volumes in the right position to print with holes.