OPS Module 10" Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10" Rack Mount for OPS Modules
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 125
- Wydruki
- 1
- Wyświetlenia
- 2277
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I created a simple mount to hold OPS modules in a 10" rack.
There are two versions:
V1 is what I used in my video. It works fine but is a bit flimsy.
V2 is more rigid, but uses a bit more filament. It also has better fitment with the heat-set inserts.
I printed this with 3D Fuel Pro PCTG, but it should work great with PETG or something similar. I probably could've made this a more printable design, but I wanted to keep the top as open as possible to account for different fan/vent variations. So, I printed it with supports.
Note: This doesn't actually connect anything electrically. I have the idea to build another version with a custom PCB and 80-pin connectors, but that's for another day.
For the threaded holes, you'll need 2 M3x8x5mm heat set inserts.