2.4g intelligent led remote holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted holder for chinese 2.4g intelligent led remote controls. Easy to print and functional design. great fit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remote control holder designed for the remote supplied with many smart LED controller boards.
The main body can be used on its own, or the front retaining pieces can be attached with super glue for a more secure fit.
I achieved excellent results without supports using a Flashforge Adventurer 5M Pro with a 0.4 mm nozzle and Flashforge HS-PLA filament. Print settings: 0.2 mm layer height and 100% infill.
Since the model is designed to print without supports, the lower section does not perfectly match the shape of the remote control when used without the front retaining pieces. Once the front pieces are attached, however, the holder conforms perfectly to the remote's shape.
Alignment guides have been added to make positioning and gluing the front pieces easier. The upper inner edges of the front pieces are rounded to allow the remote control to slide in smoothly.