1 / 5
Automatic water dispenser for dogs and other pets. — zdjęcie 1
1 / 5

Automatic water dispenser for dogs and other pets.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple and practical water dispenser for dogs and other pets.

Ocena
5 / 5
Polubienia
385
Pobrania
1379
Wydruki
4
Wyświetlenia
5259
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

Water Dispenser for Dogs and Other Pets

A simple and practical water dispenser for dogs and other pets. This design uses a standard PET water bottle as a reservoir, automatically keeping the bowl filled as your pet drinks.

If you plan to keep it outside, I recommend printing it from a weather resistant filament such as PETG. PLA is not recommended for prolonged outdoor use because it can soften in direct sunlight and degrade over time. PETG is probably the best choice, offering good UV resistance, moisture resistance, and easy printing.

Printing

The model is designed to print easily using the standard settings recommended for your printer and filament. No special tuning is required.

Recommended settings

  • Layer height: 0.2 mm

  • Perimeters/Walls: 2–3

  • Top layers: 3–4

  • Bottom layers: 3–4

  • Infill: 15–20%

  • Supports: Not required

  • Brim: Not required

Assembly
  1. Take an empty PET water bottle (standard threaded neck).

  2. Fill it with fresh water.

  3. Screw the dispenser into the bottle.

  4. Turn the assembly upside down and place it on a flat surface.

  5. The bowl will automatically maintain the water level using gravity.

Perfect for dogs, cats, and other pets, while also helping reduce plastic waste by reusing bottles that would otherwise be discarded.

Note: This dispenser is intended for personal pet use, not as a certified food-contact container.

If you find this model useful, please consider sharing a make and leaving a like!
         Also, feel free to check out my other designs. Thanks for your support! ☺

Tagi