Automatic water dispenser for dogs and other pets.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple and practical water dispenser for dogs and other pets.
- Rating
- 5 / 5
- Likes
- 385
- Downloads
- 1,379
- Makes
- 4
- Views
- 5,259
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Water Dispenser for Dogs and Other Pets
A simple and practical water dispenser for dogs and other pets. This design uses a standard PET water bottle as a reservoir, automatically keeping the bowl filled as your pet drinks.
If you plan to keep it outside, I recommend printing it from a weather resistant filament such as PETG. PLA is not recommended for prolonged outdoor use because it can soften in direct sunlight and degrade over time. PETG is probably the best choice, offering good UV resistance, moisture resistance, and easy printing.
Printing
The model is designed to print easily using the standard settings recommended for your printer and filament. No special tuning is required.
Recommended settings
Layer height: 0.2 mm
Perimeters/Walls: 2–3
Top layers: 3–4
Bottom layers: 3–4
Infill: 15–20%
Supports: Not required
Brim: Not required
Assembly
Take an empty PET water bottle (standard threaded neck).
Fill it with fresh water.
Screw the dispenser into the bottle.
Turn the assembly upside down and place it on a flat surface.
The bowl will automatically maintain the water level using gravity.
Perfect for dogs, cats, and other pets, while also helping reduce plastic waste by reusing bottles that would otherwise be discarded.
Note: This dispenser is intended for personal pet use, not as a certified food-contact container.