Blast Doors Light Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light switch cover inspired by the blast door controls in Star Wars
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Straight out of a corridor on the Death Star, this red control-panel faceplate brings some Imperial flair to any wall. Designed to dress up an otherwise boring fixture and disguise it as a piece of galactic hardware, it features recessed slots, dual circular ports, a trio of "status" buttons, and Aurebesh lettering across the bottom that translates to "Blast Doors"
Print Notes
AMS is not required for this print
Designed as a multi-part print for color separation (body, button inserts, port rings)
No supports needed on the main faceplate when printed face-down
Easy to recolor for Rebel, Mandalorian, or First Order schemes
Great first multicolor or AMS/painted project
I printed this in a simple .20 layer height with 2 walls, 3 bottom, and 3 top.
Base: Printed in black. Remove your existing switch plate. Mount the Base directly over the switch using the original screws through the two screw holes.
SwitchesInner: Printed in black. One is slotted to fit right on the light switch and still allow it to be flipped up or down. The other switch will be stationary.
SwitchOuter: Printed in silver. Fits around the SwitchesInner file.
Red Panel: Starts in red. If printing at .2 layer height, make the switch to black at layer 60.
Buttons: Starts in silver. If printing at .2 layer height, make the switch to transparent green or just green at layer 6.