Liczymy pasujące modele…
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
“Take your wine camping, on a picnic, or to a festival. These lightweight, nesting wine glasses go anywhere with their unique stem design that unscrews and allows the bases to be compactly snapped into the bowls for storage. Super…
I am trying to create a dry box within an Ikea closet. Apart from a way to remove moisture, I needed to seal the edges. However the seal kept the door open. Since my closet dry box is experimental, I did not want to commit on an…
Ikea Styrbar FB Halterung für Kallax, Billy und Expedit Türen. Ikea Styrbar bracket for Kallax, Billy and Expedit doors.
An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
Hello, Welcome to my profile, full of models and miniatures :-) I have for you an RC car RMT Land Rover T98 complete with doors and windows. They are suitable for beautifying your RC model. They are in 1:10 scale. No glue is needed for…
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
it is for nuki 2.0 and 3.0 created with help of @LAtelierdeFlorent
This is a basic door stop. It works on carpet or surfaces with friction. The ridges on the bottom help prevent slippage. I printed this with 4 perimeter walls and the default 15% infill. You should print this on its side (the side should…
I'm thrilled with Josh Makeshift's IKEA KALLAX cabinet door model , but I wanted different doors. Wanting to try my hand at Kumiko-style modeling, I went with the Kakuasa pattern and I'm super happy with the result. All instructions…
The model can be scaled in your slicer to perfectly match the height and length you need for your specific door. The wide contact surface ensures stability without damaging the floor. For best results, print it on a smooth build plate…
Resize to fit the hight of your printer. This part is designed with ASA in mind. Since it will be used outdoor you want to use an UV resistant filament. Hence the use of ASA filament. Print the parts until it fits the needed length. Then…
no need to take off lid for water filling no rattling like the original metal lid printing: due to not so high temperatures in that coffe machine section, PLA is sufficient (PETG better) don't need to add supports for door rails (but for…
Description: Designed specifically for the FlexIt TPU Contest , this doorstop combines rugged aesthetics with maximum functionality. The unique geometric structure isn't just for looks – it allows the stopper to compress slightly under…
Essencial things besides print: TPU filament 9x approx. 50 mm pieces super glue Print settings: filament: PLA layer hight: 0.2 mm infill: 15 % supports: No bed adhesion (brim, raft, skirt): No printer: Creality K1C After print you need to…
I needed to improve the security of my old 1980's sliding glass door. These are notoriously easy to break into, especially if the sliding panel is mounted on the outside of the house. Anybody with a crowbar can remove the panel in seconds…
This simple door stop prints without supports. The doorstop is meant to be used on flat surfaces like flatwood, tile etc. The hole in the design helps its strength so it doesn't break under immense pressure (it bends). the hole also saves…
UK: Enclosed Prusa Core One with side doors, MMU3 buffers and integrated filament routing This project is the result of my goal to make the Prusa Core One fully enclosed while achieving clean, stable and reliable MMU3 filament routing…
Update 05.03.2026: Front fender seal was missing in the previous version, and was corrected today. Update 22.02.2026: Factory style working hinges are added. This required a ma jor revision of the body and dashboard. The engine cover…
Update 05.03.2026: Front fender seal was missing in the previous version, and was corrected today. Update 22.02.2026: Factory style working hinges are added. This required a ma jor revision of the body and dashboard. The engine cover…
This is a minimal double-sided over-the-door hook designed to be used on both sides of a door at the same time . The hook clips over the top edge of the door and provides a hanger on each side, making better use of otherwise wasted space.…
In addition to a new look, the doors will also protect the model from scratches. It's best to use PLA filament.
This is a reinforced compression cable grommet designed specifically for hollow-core desk surfaces such as door slab desktops. Unlike decorative grommets that rely on thin veneer for support, this system clamps the top and bottom skins…
These are hooks to hang items from the top of a 35mm internal door. I designed the original over 5 years ago, each time one failed I improved the design until we have reached this stage where the hooks can take a reasonable weight with no…
Download the .STL file, slice it with your slicer, infill 20-25%. Block yours door in easy way!
A practical doorstop available in two printing variants so you can choose the ideal setup for your printer and materials. Both versions are designed for reliable grip on the floor and easy printing. 🌀 Variant 1: Full TPU This version is…
Description: This doorstop combines rugged aesthetics with maximum functionality. The unique geometric structure (also inside) isn't just for looks – it allows the stopper to compress slightly under the door's weight. Use double sided…
Summary: Ikea 365+ Lid Holder mountable on vertical surfaces, like cabinet doors, cabinet walls or walls in general. It includes complete holders for following Ikea 365+ container lids in variants for 4, 3, 2 or 1 lid: IKEA 365+ Lid,…
My unbranded tilt and slide door has these locking plates that have started to break. Unable to find replacements I modeled the plate in hopes of having some machined. The prototypes were printed in PETG and are still holding on.
drop pod that can fit space marines, dreadnought, or cargo
This is a kickdown door stop best printed from TPU, 4 latyers with 15-20% infill. The base can be TPU or any other material (I like nylon).
This is a model i made long ago to replace a broken slider bracket on an integrated fitted fridge freezer door. I hope it's useful. I printed originally in PLA .4mm nozzle and was fine The posted image is in PLA .2mm nozzle Recommended…
These are replacement door panels for Transformers G1 Brawn. I recommend disassembling Brawn in order to install them. There are two yellow blocks with holes in them that these parts will clip into. The replacement arms that are in the…
Now that your office furniture stays put on short pile Corporate-Grade carpet, those doors won't hold themselves open either. Like with the wheel chocks, there are teeth to bite into the carpet to keep it from moving. Print in provided…
In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…
Simple Print , Doorstop with a screw in handle in 2 parts. - I print the bottom part with TPU, the rest in PLA print the bottom with low infill for softer dorstop, - handle is optional.
This is the answer to all of your life's problems. When your air tools are safely secured, you will be able to get restful sleep. The print in place doors keep the tools from sliding out. I have this attached to the side of my fridge,…
Made this to keep the doors open just a little bit for our cats. This prevents accidental closing but is easy to remove because it's just magnets on the hinge. I recommend gluing the magnets in though as the fit isn't tight enough with…
This is a complete set of 2-leaf barn doors designed specifically for large, powerful photographer and videographer flashlights (the big focusable, dimmable, color-temperature adjustable models that usually ship with barn doors). If you…
An doorstop with 18 springs. Printing Infill: 30% Supports: yes (only buildplate)
Replacement window retainer clips that fits Andersen doors (my door at least) Scale it to the tallest your printer can handle, with a brim if needed.
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary MagHex Doors for Gloomhaven I designed these doors to work with MagHex Walls and…
Masterful Dungeons Mansion Doors are designed as part of the Masterful Dungeons modular dungeon system. These doors are styled for refined interior environments , such as mansions and estates, and integrate seamlessly with mansion wall…
I made this to go with the Sci-Fi platforms I posted recently. This just sits on one of the large platforms. It does not have a floor of its own. I may make and add variations as I go. The doors and windows were intended for resin. They…
I used Tpu 95a and i recomend cleaning the build plate before printing because it can warp. Created in Fusion 360 by: Michel Hoec
These Stryfe Expanded Battery doors are alternative battery covers for modded Nerf Stryfe flywheel blasters. Available in two sizes, this part is a perfect companion to use with 3S LiPos up to 1100mAh. The Modulus Stryfe requires a small…
A square design handle for internal doors with a round rose, for screw mount. The design fits an 8mm spindle to turn a latch. It supports standard door springs of 30mm diameter, which you can buy online, although a sprung latch may give…
Variation of an IKEA Billy Grip. There are some versions in the STLs. Choose your favorite. For the door handle you would need: 1x covered + 1x covered mirrored (or mirror it yourself - I just wanted to make your life a little more easy)…
Add a touch of royalty to your home organization with this vibrant "Shopping Queen" sign. Designed for fashion enthusiasts and retail therapy lovers, this piece blends clean typography with a playful crown aesthetic to brighten up any…
Kids say what they think, even if you don't always understand what they mean right away. This model is based on my littlest girl's saying. "Can you make the door on pause". Okay. Challenge accepted. So, what about a doorstop in a remote…
This little doorstop simply slides under the side of your door, if you get the parameters right for you door it should lock its position. The ends of the doorstop are slightly angled down to apply more force, to insert the doorstop push…
Since my vacuum robot mostly treats the doorstoppers as obstacles I needed a smart solution: narrow stopper which is adjustable and doesn't need much space! So I designed this stopper : An excentric roll is turned up to 180°. Indicator…
Im the greek mythologie a man called sisiphus is pushing a rock up a hill, day after day, because it rolls back down all the time. I designed this doorstop so he can hold your door open everytime you want him to. There are two different…
This is my take on a modern DoorStop and my entry to the doorstop contest. Print the two parts and twist them together, put it under the door and screw up to put pressure on the doorblade to lock it in place. This version has a interval…
Ball clip door latch. Print the door side with supports. Wall side standing up. I've included 3 sizes of door, and the fusion file if you want to change anything. There are 2 versions of the wall side, one for screws or nails, one for…
Einfacher Türstopper in Form eines Winkels. An der Seite an der die Tür anschlägt ist eine Vertiefung für einen Magneten. Dieser wird mit einer Senkkopfschraube M4x16 an den Türstopper geschraubt. Damit die Schraube genügend Halt findet,…
Einfacher Türstopper in Form eines Zylinders. An der Seite an der die Tür anschlägt ist eine Vertiefung für einen Magneten. Dieser wird mit einer Senkkopfschraube M4x16 an den Türstopper geschraubt. Damit die Schraube genügend Halt…
DoorSTOP - the ultimate functional yet aesthetic doorstopping solution. Guaranteed to start a conversation or at least get someone's attention if someone comes over. What it can do: Hold a door open Not slip on carpet or hard floor…
With this tool you can halt door movement in futuristic style, by manually adjustment in spatial placement. The form intrinsically supports the use of elastic/rubber bands as floor-side grip, which also prevents any damage to the floor or…
Print 18 doorframes (i printed 0.2mm layers) Print the attached pdf, cut doors to fit and slide them in the frames.
I redesigned the door hinges so the doors can detach easily
Got the card game and expansions at MSPGeekCon 2024 and decided they needed a nice box to all fit together in.
Fits on doors with a width of 40mm. Model is 60mm long. Model covers a gap of 15mm. At the bottom you can add some EPDM Adhesive Tape with width of 35mm and a height of 8mm.
Big litter box door, my cat is fat and does not fit in the litter box so i making bigggg one from two storage boxes :D Bolts and Nuts: M4 x 20mm - x4 M4 Thin Hexagon Nuts - x4 M3.5 x 16mm - x16 M3.5 Thin Hexagon Nuts - x4 Also added plain…
Small remix to allow mounting a Shelly Blu adapter on the rail of a Hormann automatic garage door. I've made sure it sucks out a bit at one side, so that the driving train of the door can still pass the sensor. In combination with a…
Building your own enclosure from poly-carbonate sheet is a much cheaper alternative to buying the original. This design avoids external hinges that would require you to drill into your frame. These hinges use the original mounting…
UPDATE: (10/09/24) I have improved the walls in the vault room and have now included 3 different sizes: The original size I uploaded: 80mmx80mm tile size (92mmx92mm overall size) / 100mmx100mm tile size (112mmx112mm overall size) /…
Parts to make the front doors on Lack Enclosure v2 slide back into the enclosure once fully opened. Since it's best to leave them open for some filaments such as PLA, I wanted them to not be swinging outward where they could be in the way…
I'm a big fan of the OpenForge dungeon tiles for D&D designed by @devonjones, and I've been steadily building out a set of my own. In designing a new encounter for my players, I realized that there isn't yet a Diagonal Cut-Stone tile that…
I was building a Japanese tea house. Couldn't find Shoji doors, so I made my own. These will fit into a 1X4X6 door frame, but they don't swing open… Maybe use smooth tiles to create sliding doors? PRINT NOTES Printed with 0.4mm nozzle,…
Kids are always destroying the loop on the towels. So I had to make a towel holder which works without the loop. Just 2 parts, very easy to print. Just to clip together. Would hold just by clipping together, could be reinforced with a…
My Original project: https://makerworld.com/it/models/638010#profileId-563549 A simple 3D-printed floor doorstop , designed to be made in just 30 minutes using 6 grams of PETG filament, chosen for its flexibility. 2 sizes for door thick…
I got an airfield RC t-28 from a friend at my field, it did not have these doors on it so I made my own. Inner door and the one on the strut ONLY . Includes multiple holes depending on how jank your plane is. Will require supports on the…
remixed doorstop hook! LoboCNC's doorstop is very clever, but I've broken 3 of the hooks, so far—by forgetting that the doorstop was in place, and trying to close the door. according to KISS principles, rather than designing a complicated…
This is a simple doorstop that can be screwed to the ground. I designed it in Tinkercad to keep it simple. The doorstop is approximately 4 cm (1.57 inches) in diameter and about 2.2 cm (0.87 inches) in height. The screw hole is around 10…
Einfach zwei Löcher in die Querleiste bohren, Schrauben durchstecken, Mutter in die vorgesehene Öffnung. Hält. PLA reicht völlig.
FOR PROMPT SERVICE, BLOW ME, SIGN From the classic John Candy film, The Great Outdoors. Category: Signs & Logos
Why do you need this? I dunno. That's for you to decide. I made this for me for a specific need but figured others might like it. This is for doors between 1 ¼ inches and ~2 inches thick. See technical drawing for reference. This will be…
Dog doorstop made by a doorstop. He wanted to added for others to use as they wish
A simple tool to block elevator doors for maintenance. PETG 0,3mm 100% infill recommended
Introducing the Flexi Grumble, a whimsical and articulated 3D model that's perfect for collectors and fans alike! This unique creature features flexible, articulated tentacles, allowing for a wide range of poses and dynamic displays.…
Meet Figure the Clockrider, inspired by the latest update in 'Roblox Doors.' This unique 3D model showcases a mechanical figure perched atop a whimsical alarm clock. Perfect for fans of the game and collectors alike, this model is ready…
⚫Crystals UPDATES⚫ Side doors and mirrors they are compatible with all crystals. But the front axle is only for Crystal 8011. FULL upgrade - Zetor Crystal 8011 https://www.printables.com/model/252938-tractor-zetor-crystal-8011-no-supports…
![MagHex Doors for Gloomhaven [RE-UPLOAD]](https://media.printables.com/media/prints/fc529e7d-01bc-42a7-afcf-957795ed3548/images/12680901_c3ac7258-e71d-4dae-8c69-06ef71c4159f_33d8a4a7-fd0a-4380-b967-2aab9532f26b/doors-render.jpg)
![Türstopper mit magnetischem Halter [Doorstop with magnetic holder]](https://media.printables.com/media/prints/629122/images/4985133_3505fa28-0fd5-4813-80ff-9ba53feccd21_b90d61af-31b8-4b2d-9be0-7a95fbd6e2fe/img_20231027_163115.jpg)
![Türstopper mit magnetischem Halter #2 [Doorstop with magnetic holder #2]](https://media.printables.com/media/prints/629160/images/4985337_0a663a2c-eaa5-4ff9-bcd1-ce425775dabe_a88e0297-b849-49fc-ac67-c3b56009beed/img_20231024_192008.jpg)
