Stiffeners for Original Prusa Enclosure doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stiffening elements to reduce vibrations of Original Prusa Enclosure doors
- Ocena
- 4,944 / 5
- Polubienia
- 120
- Pobrania
- 389
- Wydruki
- 19
- Wyświetlenia
- 1611
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I assembled my Original Prusa Enclosure and used it for the first time, I was a bit surprised at the volume coming from the doors vibrating. In general, the doors were very wobbly.
The remedy was these reinforcements I designed, which are mounted in place of the original hinges and door magnets and give the doors more stability to reduce the vibrations.
It probably won't work to non-destructively disassemble the old hinge parts on the enclosure from the parts on the door. But with a few extra grams of filament, these enclosure hinges can also be reprinted (see https://www.printables.com/model/251931-enclosure-printable-parts/files).