1 / 3
Hook to hang on doors | Crochet a suspendre sur des portes — zdjęcie 1
1 / 3

Hook to hang on doors | Crochet a suspendre sur des portes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hook for doors : towels, clothes, bags.... | Crochet pour porte: serviette, vêtements, sacs...

Ocena
5 / 5
Polubienia
48
Pobrania
409
Wydruki
2
Wyświetlenia
1249
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

[Français en-dessous]

[EN] 

[Update 03.02.2024] I noticed some mistakes in the files I uploaded. I will print more of them, I corrected it for you and add a new one…

  • "Classic" Hook: small place for hanging; 15mm
  • “Large” Hook: bigger place for hanging: 35mm

____________

A simple hook to put on your bathroom's door. We have big door (thickness: 42.5mm), so I create un gap of 43.1mm for the hook.

I printed it  in November 2020, through time, I never had any problems.

  • Printed on Creality Ender 3 Pro
  • Nozzle 0.2mm - layer 0.1mm
  • Printed in ASA (Prima Creator)

3 years laters… With the 02.02.2024 update :

  • Printed on Prusa Mini+
  • Nozzle 0.4mm - layer 0.15mm
  • Printed in ASA (Prima Creator) - Infill 25%
  • Printed in PETG (Prima Creator) - Infill 15%
  • Printed in PLA (Prima Creator) - Infill 15%

[FR] 

[Mise à jour 03.02.2024] J'ai remarqué des inepties dans le fichier mis en ligne. Je vais en réimprimer, j'ai corrigé le fichier pour vous également et j'en ai ajouté un nouveau.

____________

Un simple crochet à mettre sur la porte de la salle de bain. Nous avons de large porte (42.5mm), j'ai donc créé un espace de 43.1mm pour le crochet.

Je l'ai imprimé en Novembre 2020, Depuis je n'ai jamais eu de problème. 

  • Imprimé sur Creality Ender 3 Pro
  • Buse 0.2mm - couche 0.1mm
  • Imprimé en ASA (Prima Creator)

3 ans plus tard… avec la mise à jour du 02.02.2024 :

  • Imprimé sur Prusa Mini+
  • Buse 0.4mm - couche 0.15mm
  • Imprimé en ASA (Prima Creator) - remplissage 25%
  • Imprimé en PETG (Prima Creator) - remplissage 15%
  • Imprimé en PLA (Prima Creator) - remplissage 15%

Tagi