Print-in-Place Hinge for 1/8" Acrylic Doors for 4040 Extrusion Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple door hinge for 4040 extrusion and 1/8" or 3mm-thick door panels.
- Ocena
- 3,5 / 5
- Polubienia
- 356
- Pobrania
- 816
- Wydruki
- 2
- Wyświetlenia
- 3304
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A simple door hinge for 4040 aluminum extrusion and 1/8" or 3mm-thick door panels. Recommend ¼" or 5 mm bolts for the door, and 5/16" bolts on the side for the 4040 extrusion (8 mm T-slot nuts).
Supports are required on the hinge face that is raised off the build plate by 1/8" (~3 mm) for the door. Use no supports inside the hinge – the parts will print in place without them. Once printed, you can add some vaseline or other plastic-friendly grease into the exposed holes of the hinge to smooth out the motion.
PETG recommended.