1 / 6
Print-in-Place Hinge for 1/8" Acrylic Doors for 4040 Extrusion Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple door hinge for 4040 extrusion and 1/8" or 3mm-thick door panels.
- Rating
- 3.5 / 5
- Likes
- 356
- Downloads
- 816
- Makes
- 2
- Views
- 3,300
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A simple door hinge for 4040 aluminum extrusion and 1/8" or 3mm-thick door panels. Recommend ¼" or 5 mm bolts for the door, and 5/16" bolts on the side for the 4040 extrusion (8 mm T-slot nuts).
Supports are required on the hinge face that is raised off the build plate by 1/8" (~3 mm) for the door. Use no supports inside the hinge – the parts will print in place without them. Once printed, you can add some vaseline or other plastic-friendly grease into the exposed holes of the hinge to smooth out the motion.
PETG recommended.