ABB tango switch + key hexagon holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imagine... What if you just never forget to turn the lights off again. And don't need to drill the key holder...
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a functional and aesthetic modular keychain holder designed to slide right under or snap onto your standard ABB Tango light switch frame. This helps prevent drilling any holes into the wall and lets you hang your keys, never forget them and protect the wall from from grease. Bonus is you don't search for keys when the lights are off.
Simply remove the ABB Tango frame, place the holder underneath, and snap/screw the frame back in place
Also you can make them in any colors you like. For example fluorescent.
Print Instructions
Layer Height: 0.2 mm
Material: PLA or PETG (Works great with both)
Perimeters (Walls): 3 walls recommended for the hex inserts to ensure mechanical strength.
Hex inserts have very low clearance in order to ensure they stick. If you are having trouble inserting them, adjust scale by 1-5 %.
Print the hex inserts slowly as they will have problems sticking to the bed plate. You can use brim.