500W Spindle Vacuum Dust Extractor for E3CNC Conversions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vacuum dust extractor designed to work around the E3CNC Conversion, but should work for most 500W spindles.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a mount that would allow me to have my spindle clamped as low in the spindle clamp for the E3CNC, but found none that accommodated this, so I made a modified version of @djos_1475 's shoe.
All parts except the suction adapter can be printed without supports, and the spindle mount should be cnc'able out of clear plastics if you want to make a machined version.
I printed everything out of ABS except for the brush bristles, which are printed in TPU. There is a 3mf with the exact settings for that print, because you need the two stacks of bristles to print bridged otherwise it'll end up with stringing and strangeness. Everything else can be printed with 4 walls, 5 floors, 5 ceilings, and 30-40% infill of your choice.
You will need:
3x3mm magnets: 28 at least (14 for the spindle mount, 14 for each of the two adapters)
Some variety of CNC Vacuum Brush ( like https://www.amazon.com/dp/B0DP21RQNT )
Super Glue (for magnets)
Hot Glue (for the Brush)
The vacuum hose adapter is set for an ID of 31mm. The place it goes in the shoe is set for a 36mm OD. 36mm is the largest vacuum hose I saw, and 31mm is the smallest, so this, with adapters, will support a wide range of hoses. If you need a specific ID let me know and I can whip one up for you.
The printable bristles are fused together in my print settings, but are very flexible. You may wish to separate the bottom 1/3 of the bristles to match your work space though.
Update 1:
Realized that the duster could be too shallow to accept the 45 degree adapter with a hose tube installed so posted a fixed version. Same overall height, just deeper main body cavity.
