P
PrintablesRavenkeeper
E3CNC - Ender 3 Pro based CNC!
This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…
- Pobrania
- 1954
- Polubienia
- 904
- Ocena
- 5
Wyniki wyszukiwania: e3cnc
Liczymy pasujące modele…
P
PrintablesShadowphyre
E3CNC belt clamps with original endstops
I wanted to be able to use the original endstops + their wiring in my E3CNC so I designed these custom belt clamps. They are a directly drop in replacement to the original belt clamps, and you can screw in the original end stops. You will…
- Pobrania
- 156
- Polubienia
- 16
- Ocena
- 5
P
Printablesbr41ndamage
E3CNC limit switch z-probe tool height sensor
uses one of the Ender3 limit switches as a tool-height sensor, utilizing the free space in front of the machine frame
- Pobrania
- 109
- Polubienia
- 13
- Ocena
- 5
P
PrintablesChauk
E3CNC MGN MOD ALT (THREADED ROD) (VERSION 2)
UPDATES VERSION 2 (Tested) - Returns to standard tool mounting to maintain compatibility of the original designs tool heads and bearing plates. - Added a hole for allowing the X Axis rod extend past the Gantry. - QOL improvements. -…
- Pobrania
- 94
- Polubienia
- 18
- Ocena
- 0
P
PrintablesCrys' Livingroom Workbench
E3CNC RODMOD (Zero backlash)
Same as the E3CNC RODMOD but with zero backlash nuts, similar to the Milo CNC.
- Pobrania
- 53
- Polubienia
- 9
- Ocena
- 0
P
Printablesspoonie woonie
Y axis V wheel support - E3CNC - Ender 3 Pro based CNC
Print with the same setting as the E3CNC Need to reduced the sized spill board by 10mm along the Y Axis both sides Uses same bolts and nuts
- Pobrania
- 49
- Polubienia
- 11
- Ocena
- 5
P
PrintablesSemkoAnton
E3CNC Pen Holder
This is a remixed pen holder for plotters , now with a dedicated bracket for E3CNC machines . The main upgrade is the built-in mounting bracket , allowing the holder to be securely attached to an E3CNC frame with minimal effort.…
- Pobrania
- 44
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBarrettMFG
Temunator - E3CNC based plasma table
The TEMUNATOR - named because most of the parts, including the extrusions, were sourced from the reputable temu marketplace. These models are intended to modify the E3CNC for use as a plasma cutter, with a usable work area of about 800mm…
- Pobrania
- 27
- Polubienia
- 15
- Ocena
- 0
P
Printablesspoonie woonie
Pen plotter tool for E3CNC - Ender 3 Pro based CNC
Print with the same setting as the E3CNCE3CNC Can work from a Bic up-to a Sharpie. Required 2 x 5mm brass heated inserts 2 x 25x5mm bolts
- Pobrania
- 22
- Polubienia
- 9
- Ocena
- 0
P
PrintablesCrys' Livingroom Workbench
Enclosure + Ebox for E3CNC
This is my enclosure and electronic box. No manual, please only build this if you are sure the Fusion files are enough for you. The acrylic glass is 3mm and bend using the jig in the Fusion and a hot air gun. Scale the enclosure to your…
- Pobrania
- 17
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJormundgand
Alternative Z-mount for E3CNC with round leadsscrew nut
Original Freecad source file included. https://www.printables.com/model/1318299-e3cnc-ender-3-pro-based-cnc
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesExcit3D - Talon
500W Spindle Vacuum Dust Extractor for E3CNC Conversions
I wanted a mount that would allow me to have my spindle clamped as low in the spindle clamp for the E3CNC, but found none that accommodated this, so I made a modified version of @djos_1475 's shoe. All parts except the suction adapter can…
- Pobrania
- 8
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDaniel Stölzner
Ringlight Mod for E3CNC
This turns the bottom part of the X gantry into a ring light. It fits a 24 LED ring light with 9cm outer and 7.5cm inner diameter. It also contains a cable channel to route the cable through one of the grooves of the vertical 2020…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printables
Alternative Z-mount for E3CNC with round leadsscrew nut
Original Freecad source file included. https://www.printables.com/model/1318299-e3cnc-ender-3-pro-based-cnc
P
Printables
Y axis V wheel support - E3CNC - Ender 3 Pro based CNC
Print with the same setting as the E3CNC Need to reduced the sized spill board by 10mm along the Y Axis both sides Uses same bolts and nuts
P
Printables
E3CNC Z endstop mod
I wanted to use OEM creality endstop instead of having to buy new. If you lost yours you can look on the jungle store and find them for $8 under: 5 Pcs Micro Mechanical Switch 3 Pin Compatible with CNC RAMPS 1.4 RepRap 3D Printer CR-10…
P
Printables
E3CNC Pen Holder
This is a remixed pen holder for plotters , now with a dedicated bracket for E3CNC machines . The main upgrade is the built-in mounting bracket , allowing the holder to be securely attached to an E3CNC frame with minimal effort.…
P
Printables
E3CNC Extended XY Plates for 350mm 4040 profile
This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…
P
Printables
E3CNC - 65mm spindle mount
65mm spindle mount for Ender 3 Pro based CNC by Ravenkeeper. Allows you to keep the original Z-axis carriage, for future tool changes such as laser or plasma head
P
Printables
E3CNC integrated vacuum port
I wanted a dust shield for my CNC with a Makita trim router that didnt block access to the collet lock button, and didnt decrease the work area. The brush assembly is magnetic and removable, and uses TPU printed brushes.
P
Printables
E3CNC 8 Wheels X Axis Plate
This is a drop-in replacement for the original X-axis plate. It aims to fix the biggest issue I had with the original one: lack of rigidity in the vertical plane. I was able to rock it back and forth quite a bit, and that was a problem…
P
Printables
E3CNC - RODMOD
The "big brother" of the original E3CNC ! [Currently untested] Still based around the Ender 3 Pro (and its clones) but with a little more heft to it. This version is just a side project I did to use up some spare 12mm rods i had laying…
P
Printables
E3CNC Z endstop mod
I wanted to use OEM creality endstop instead of having to buy new. If you lost yours you can look on the jungle store and find them for $8 under: 5 Pcs Micro Mechanical Switch 3 Pin Compatible with CNC RAMPS 1.4 RepRap 3D Printer CR-10…
P
Printables
E3CNC Extended XY Plates for 350mm 4040 profile
This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…
P
Printables
Cable Management System for E3CNC Machine
This model is a modular cable management system for the E3CNC machine , designed to organize and securely route wires along the machine structure. The system includes multiple mounting elements and clips that help keep cables in place,…
P
Printables
E3CNC based custom wooden build
I came across the E3CNC project and wanted to build my own version on it but with part's I got onhand to increase size and stability. It featured double supported linear rods on y-axis, quad linear rods on x-axis and double linear rods on…