1 / 10
GM EV Level#1 J1772 Charger holder and cable orginizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EV charger holder and organizer of the 13mm power cable
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
There are 2 brackets to hold the garger by holding IN/OUT cablel. Such simple design providest the most efficient cooling.
The cable orginizer and J1772 holder can be used for any charger with 13mm cable.
There are 2 versions, one for my particular case with lifted sides and another for a flat wall.
FreeCAD file is attached too.
