1 / 7
Heavy-Duty Cable & Hose Wall Holder (Screw & Adhesive Variants) — zdjęcie 1
1 / 7

Heavy-Duty Cable & Hose Wall Holder (Screw & Adhesive Variants)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Heavy-duty wall holder for cables & hoses. Mount with screws or glue to organize your garage.

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
GNU General Public License v2.0

Heavy-Duty Cable & Hose Wall Holder

Keep your workspace, garage, or utility room tidy with this robust wall-mounted holder. Designed in FreeCAD, this bracket features a wide, curved cradle to prevent thick cables, extension cords, ropes, or flat firehoses from kinking or taking damage over time.

This project includes two mounting variations to adapt to any surface:

  • With Holes (cable-wall-holder-holes.stl): Features pre-modelled countersunk holes for a secure, flush fit using standard wood screws or drywall anchors. Ideal for maximum mechanical hold under very heavy loads.

  • Without Holes (cable-wall-holder-no-holes.stl): Designed with a completely flat backplate. This version is ideal if you cannot drill into your wall (like tile, metal cabinets, or masonry) and prefer mounting using heavy-duty glue, construction adhesive, or double-sided mounting tape (like 3M VHB).

Recommended Print Settings:

  • Orientation: Print the model flat on its side (as shown in the slicer screenshots). Printing on the side ensures the layer lines run parallel to the curve, giving the bracket maximum structural strength against downward pulling forces.

  • Layer Height: 0.20mm (Structural profile)

  • Infill: 15% - 20% (Gyroid or Grid)

  • Supports: None required when oriented correctly on its side.

  • Material: PLA works great for indoor use. For outdoor applications or hot garages, PETG or ASA is recommended.

Tagi