1 / 3
Garvee 9000 BTU PAC-M09 Twin Hose Mod — zdjęcie 1
1 / 3

Garvee 9000 BTU PAC-M09 Twin Hose Mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Convert single hose portable air conditioner to twin hose. Greatly improve efficiency and reduce negative pressure

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Fit:

  • Garvee 9000BTU Model: PAC-M09

Potentially other units, see the photos attached for the unit this is made for and the vent this replaces. comment your model if it fits your unit

not 100% perfect but good enough, fits unit well but may need a bit of trimming, the filter doesnt fit perfectly and is a loose but good enough. i have no plans to make any changes to this as i only printed it once and it was good enough for me to use, given the model size and filament usage i dont see any benefit in me trying to fine tune this further.

use hose mounting pieces from https://makerworld.com/en/models/1333844-rotary-lock-adapter-hose-mobile-air-conditioner

The "Flange_Klimalock.stl" from Partalarm can be trimmed by 2.5mm if you want to save plastic, i cannot re upload the modified version/ upload the full fusion 360 file due to the licenses used. Please source directly from the above link and trim yourself i you want.

Requires:

  • 4x m4 bolts 10mm

  • 4x m4 nuts

Recommendations:

  • Print in ABS/ASA, PETG should also work

  • This is a large model, if you have a small printer youll need to cut the model up and print parts and glue back together (abs/asa can be bonded with acetone slurry)

  • Use a vinylpyrrolidone based bed adhesive (Nanopolymer/3DLAC/printer goop/some hairspray brands) 

Tagi