1 / 3
Garvee 9000 BTU PAC-M09 Twin Hose Mod — image 1
1 / 3

Garvee 9000 BTU PAC-M09 Twin Hose Mod

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Convert single hose portable air conditioner to twin hose. Greatly improve efficiency and reduce negative pressure

Rating
0 / 5
Likes
2
Downloads
13
Makes
0
Views
78
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Fit:

  • Garvee 9000BTU Model: PAC-M09

Potentially other units, see the photos attached for the unit this is made for and the vent this replaces. comment your model if it fits your unit

not 100% perfect but good enough, fits unit well but may need a bit of trimming, the filter doesnt fit perfectly and is a loose but good enough. i have no plans to make any changes to this as i only printed it once and it was good enough for me to use, given the model size and filament usage i dont see any benefit in me trying to fine tune this further.

use hose mounting pieces from https://makerworld.com/en/models/1333844-rotary-lock-adapter-hose-mobile-air-conditioner

The "Flange_Klimalock.stl" from Partalarm can be trimmed by 2.5mm if you want to save plastic, i cannot re upload the modified version/ upload the full fusion 360 file due to the licenses used. Please source directly from the above link and trim yourself i you want.

Requires:

  • 4x m4 bolts 10mm

  • 4x m4 nuts

Recommendations:

  • Print in ABS/ASA, PETG should also work

  • This is a large model, if you have a small printer youll need to cut the model up and print parts and glue back together (abs/asa can be bonded with acetone slurry)

  • Use a vinylpyrrolidone based bed adhesive (Nanopolymer/3DLAC/printer goop/some hairspray brands) 

Tags