Counting matching models…
I picked up a used portable AC unit that had almost none of the original duct work. Rather than spend $80 on replacements, I reverse engineered the piece I had and designed these elbows to fit my application. Printed out of PETG at 100%…
This is a magnetic insect screen for Trotec Wall Air Conditioners. You glue the magnetic ring with adhesive e.g. silicone to the Trotec wall outlet and then you can clip the insect screen over the complete outlet. What you need for the…
A plug on the condensate outlet tube from the air conditioner. It is made for a tube with an outer diameter of 16 mm.
Why Needed After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T , part number 12120600A23603 and extended the exhaust hose to reach it, I found that the air blew straight out the doorway, cooling the next room,…
Backstory My makerspace tends to be the warmest room in the house. In the winter, I can just open my window and let in some cold air. In the summer, I have the choice of being uncomfortable in my too-warm makerspace, or being…
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
An adapter for an air conditioner with 130mm hose. Look at the PDF file for dimensions. RELEASES 24/08/2025 Adding the file "AirConditionerAdapterB130mm.stl" for the other side of the hose. Print Settings Printer : Prusa Core One Rafts:…
This design was made to hold the Dometic air conditioner remote used in a SuperTramp camper. One design can be mounted using tape and the other can be mounted using small screws. Both designs are contained in the FreeCAD file and can be…
Airfel 9000 mobil air conditioner louver link
🧼 Soap Identifier Grid – 3-Piece Set This model is designed to easily identify different soap bars , making it perfect for bathrooms where shampoo, conditioner and body soap bars look very similar. Each grid has a distinct pattern ,…
Kickass portable A/C adapter that allows the hot air outlet flexible hose to come out from the top of the unit. It helps save space behind it, allowing to place the unit in small areas, such as caravans, vans, and cars. Printed with PLA,…
Latrzask for Rittal air conditioners used to attach the front panel of the air conditioner
I made this to keep small critters and bugs out of the air conditioner. Use standard window screen and sandwich it between the two models. M3 screws to fasten them together.
My mount from the old mobile air conditioner broke, but I couldn't find a new one. So I decided to do it myself). It might be useful to someone. My air conditioner model : airsonic ps-12 comfort
I lost 2 of the hose connectors to my Whynter ARC-14s, and I checked everywhere online for one with no luck, so I modeled this off of the ones I still have. It is a 1 to 1 recreation (aside from the curve, which I couldn't figure out the…
I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…
Air Conditioner Remote wall mount for Midea RG70E/BGEF RG70E/BGEFU1
Fixup for the 5.9 inch exhaust hose for a portable air conditioning unit. Original was almost unprintable.
Original cap came broken in the mail. So I just made a new one to seal it, rather than going through the hassle of returning and waiting for a new one.
In this project I designed a Midea 2-in-1 hose adapter for my REAL COOL 35 air conditioner. After several attempts, it now works great. It is crucial to use materials such as chipboard or multiplex with a thickness of 15mm. However, the…
This is a holder for a Panasonic air conditioner remote. I have no idea what the remote type designation is, but if your remote looks like the one in the pictures, it should fit nicely. It will probably not fit any other type of remote,…
This connector is designed to join two ends of an air conditioner drain tube. It was developed because the corrugated tubing was damaged and could not be replaced. The connector ensures a secure connection between the two tube ends,…
This is a 3D-printed replacement control knob for the Astro AA-N9KM air conditioner. It replicates the original part, allowing you to rotate left and right to adjust temperature and timer settings. Design Features: Compatible Model: Astro…
Exhaust vent adapter for portable air conditioner, desgined around a "click CPAC1907-C" but should fit any unit with an outlet of 110x140mm and 3mm thick base. Suits a 100mm duct pipe
Surprisingly couldn't find one of these modelled up anywhere. Accidentally threw the original out and shipping times out here are usually over a week, so instead of waiting I figured I'd make one so anyone else who needs it can have it…
Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…
I've recently transitioned to using bar soap/shampoo/conditioner in an effort to be more environmentally friendly. I don't have a shower organizer so I designed this to hold the three items and allow for drainage of excess soap and water.…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker If you're anything like me and you hate anything going to…
Drain extender for LG window air conditioner model #LW6017R (may fit many other makes or models with a rear drain hole). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used.…
Drain extender for Frigidaire window air conditioner model #FFRE08L3S1 (may fit other models). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used. Needs supports between part…
An adapter for a movable ac exhaust air. Just screw the pipe to the adapter larger hole and screw the adapter to the ac unit. I recommend printing in PETG or more heat resistant plastic if intended for an ac exhaust because the hot air…
My wife picked up some shampoo bars, and I really like them, so I needed a container to hold them when I travel. I could have used a regular rectangular soap bar container, but where is the fun in that. I made the shampoo bar holder…
A friend broke his thingys so I made some for him with the name of his radio programme :D 2 pieces, glue after Category: Automotive
Small drain-able travel cases for bars of shampoo and conditioner. This box can hold up to a bar which is 57.6mm x 37.2mm x 57.12mm. Print at 0.2mm with honeycomb infill of 25% and not top or bottom solid layers either in the lid or in…
Wall-mounted AC remote holder with a 22x62 mm slot, suitable for most AC and TV remotes. Attaches with screws or double-sided tape. You can download the file and edit the dimensions using fusion or scale it up to your needs :)
You have to turn it for it to look better.
An adaptor that allows two lengths of 100mm ventilation ducting to be attached to the output of a small "window rattler" airconditioning unit. Print instructions Category: Household Print Settings Printer Brand: Up! Printer: Up Mini…
I found the coils on my Midea Portable Duo Air Conditioner got dirty pretty quickly and it was somewhat difficult to clean them, so I wanted to add a filter to the intake so I could just pop it off and wash it periodically while…
A travel container to store a shampoo bar, conditioner bar and body wash bar. designed for Kinkind brand of bars. Originally designed with a sliding lock and to be 100% printable with only a little super glue needed for assembly there is…
Air Conditioner Fan Shroud Anti-Vibration Feet Tired of that annoying rattling sound coming from your air conditioning unit? These 3D-printed anti-vibration feet are designed to reduce noise and vibrations caused by a loose or vibrating…
Moved into an apartment, and the holder for the air-conditioner remote control was missing, so I designed and printed this one. Sticks to the wall with a single small command strip. Fits a remote up to 60mm wide, and 20mm deep - in my…
Тримач для пульта кондиціонера "Галактика"
IT Pinguino De Longhi, adattatore scarico aria calda vero l'esterno, diametro interno 130mm, esterno 135mm, identico all'originale, adattabile a qualsiasi condizionatore EN Pinguino De Longhi Portable Air Conditioner air vent, exhaust…
No support needed. Print in PLA, 0,6mm, <10% infill. Use 2,5mm double-sided taper for wall mount.
DANBY Air conditioner AC 7 Inch adapter/reducer to 5.9Inch (15cm) originally drawn for model DPA120B8WDB-6. Short and long Versions (I prefer the short one). Reducer to 5.9Inch (15cm) drawn because 7 inch ducts seem harder to find on…
My HVAC external unit started to make weird noises because the external case vibrates a lot. Need to fix this ASAP in order to not annoying the neighborhood. External whaser need to be printed in ASA in order to last long, internal whaser…
6-inch hose mount plate compatible with many ready-made snap-ring hoses, but a printable collar is included if you have raw, uncapped 6in hoses instead. re-uploaded - created by grauerfuchs https://www.thingiverse.com/thing:4976916
This model is made to replace a broken plastic wheel on the Danby Air conditioner AC model DPA120B8WDB-6. Print file are made for PLA, but STL files could be used to reslice to print out of softer plastics to avoid damaging flooring. Once…
Transfer dish for Soap, Lotion, Shampoo, Conditioner to empty bottles in bath room
Remote Control Holders for Air Conditioner (should fit any model) & Television set (Xiaomi) & a Ceiling Fan. Prints in standard PLA
Use with Waterproof Suction Cup Hooks Holes for draining Recommended to use with PETG
I designed this seal kit for my mobile AC. So now all the air in my room gets sucked out withoud warm air coming in. Its made specifically for my sliding door so may need to be adjusted to your specific door. Made for a exhaust tube with…
Переходной адаптер с трубы на выход (192х140) из мобильного компрессора. Фактический размер паза 195*185*3 на мобильном кондиционере Переход высотой 20 мм на диаметр 160 мм Возможно изготовление других размеров.
I selected the sizes, glued an adapter for my air conditioner from two models. It is approximately 5" - 115mm inner, 125+-mm outer. Glued in the orca slicer. If you use Stl, you need to add "volume for subtraction" of 110mm\110mm\25mm,…
Easy to thread to exhaust pipe. It works with both clockwise threads and counterclockwise threads and is modeled after other attachments that came with my air conditioner. I printed in ABS, these pipes can have a lot of heat. I printed…
A part made by me to guide cool air from air conditioner to where I want. Printed in PETG, can be endlessly extended. Can be mounted with a two-sided glue tape or with screws. VERY lightweight. only 20g per section
An a adapter that will fit within a 1x6 or 2x6 for your Pelonis portable air conditioner. This allows for you to use a piece of wood to seal your window, rather than stacking the flimsy plastic boards. I posted versions for 2x material…
Why Needed Most portable air conditioners ship with a set of window sliders that allow them to be mounted to windows with length between 19.4 and 62.2 inches (49.3/158.1 cm). My window is shorter than that -- 15.2 inches (38.6 cm). You…
The clips on these dual hose portable air conditioners are notorious for breaking. This is a solution that saves you buying a whole replacement hose/interface for your Danby or Midea A/C. The clips can be retrofitted to any A/C hose…
The Arctic King Portable Air Conditioner window slider kit was designed to fit most standard "Vertical" and "horizontal" window applications. However, it may be necessary for you to improvise/modify some aspects of the installation. The…
Enclosure for ESP8266 HW-364A with OLED Display and IR LED for Air Conditioner Controller (ESPHome) Practical enclosure designed for the ESP8266 module on the HW-364A board (NodeMCU V3 with built-in 0.96" 128x64 OLED), featuring a…
Could you use a WinterWind this Summer? Don't want to spend $200+ on that name brand cooler which rhymes with SpicyBees? Turn any plastic ice chest into a cheap personal air conditioner and bring some comfort to that stuffy corner of your…
Insects were getting into the drain line of my air conditioner, so I designed this plug to stop them. Can be printed as a solid plug or as a mesh plug by adding a 12mm cylinder modifier with top and bottom shells set to zero and infill…
300mm fan (298mm, actually, to ensure clearance to the fan shroud) with 8mm D shaft. Recommend printing in PETG with PLA supports. Set supports as “soluble” with 0mm separation. Don't forget to change the interface extruder to PLA as…
DeLonghi portable air conditioner pass through exhaust vent
A plug on the condensate outlet tube from the air conditioner. It is made for a tube with an outer diameter of 16 mm.
Air Conditioner Hose Clamp Adapter – 131mm OD This 3D-printed adapter is designed to securely clamp an air conditioner exhaust hose to a wall or window panel. Ideal for portable AC units, this part ensures a snug and stable connection.…
Why Needed After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T , part number 12120600A23603, I found that the included Exhaust Hose didn't reach. I couldn't find an extension hose with matching fittings, so I…
Why Needed After I mounted the air exhaust passage that came with my Midea MAP08S1XWGR-T , part number 12120600A23603 and extended the exhaust hose to reach it, I found that the air blew straight out the doorway, cooling the next room,…
Backstory My makerspace tends to be the warmest room in the house. In the winter, I can just open my window and let in some cold air. In the summer, I have the choice of being uncomfortable in my too-warm makerspace, or being…
Hier findet Ihr ein Modell eines 3-teiligen Luftkanals um den Schlauch einer mobilen Klimaanlage mit Außendurchmesser 150mm besser als mit der originalen Halterung an einem Dachfenster befestigen zu können. Der Kanal ist insgesamt 38cm…
Note: This model is an adapter for a specific air conditioner and ventilation hose . There's no guarantee that it will work with your unit- but if you're handy, feel free to use this design as a jumping off point and modify it to suit…
We are not allowed to install a split air conditioner in our apartment, so we have to use portable air conditioners that push hot air out through a hose. However, these units create negative air pressure and suck hot air back in. To…
My Midea U Shaped AC was missing a rubber foot for the window bracket so I made this as a replacement for it. I printed this on it's side with supports enabled in TPU 95A and although it's stiffer than original it does the job. You could…
IMPROVED VERSION: more adjusting possibilities and better stability because of 2 additional rear feets. and a bigger drip tray This project was born out of necessity on a hot summer day at my desk. I wanted a simple and effective way to…
Needed a solution to deal with 3 x 180mm square based dispensers in the shower without them constantly falling off the shelf. While I was at it, I integrated some features to hold a few razors of assorted shapes and sizes, along with a…
The reduction and support for air conditioner filament PETG Devil Design or akvivalent (pctg, asa) support: yes nozzle 240 bed 85-90 infill 15-20% glue: yes (support)
This model it fits on Yamato Air Conditioner remotes, no holes for screws. i used double side tape.
I created this vent to be used with my tilting windows. The air conditioner I have is a FUAVE ACB09K01 and this vent clicks on the end that is designed to be used with the fabric window gap closer. Normally you need to Velcro strips to…
Air conditioner hose nozzle for window. Inner diameter 120 mm
Adapter for room air conditioner. Adapter for room air conditioner. This is a whole kit for throwing air through a wall in a building. The kit consists of a connecting duct with an adapter, gaskets, grille and hood. Everything is designed…
I designed it for one of my clients. They had a broken motor mount, I took the original one as a reference and designed it. More strength and better fitting.
This is for any portable AC unit's exhaust hose. It fits any 5 inch air hose
Grille for air conditioner, has an opening of 246x130 mm. Should be quite universal but made for mine which is a chinese rebranded A/C “Sandstrøm”. There are two versions, either 70 or 50 degree flaps. I have printed 50 degree version. To…
Some time ago I bought mobile air conditioner from Action store (9000 BTU; see here ) and recently I wanted to use it for dehumidification, yet I didn't have proper hose to drain the condensate, so I decided to adapt some old shower hose…
I recommend printing it with PETG. PLA will get too soft due to the heat
Angled Holders for the Ultracapacitor conditioner board by Ian Canada - DIY Audio WARNING – Ultracapacitors are very dangerous! EVERYTHING IS DONE AT YOUR OWN RISK! Don't have a 3D printer your self? I am selling a small batch here:…
An adapter for an air conditioner with 130mm hose. Look at the PDF file for dimensions. RELEASES 24/08/2025 Adding the file "AirConditionerAdapterB130mm.stl" for the other side of the hose. Print Settings Printer : Prusa Core One Rafts:…
Holds your Moptop haircare products upright so the product is ready to be squeezed out at all times. Also is designed such that water should never pool up and allow it to build bacteria. You should probably rinse it out once in a while…
Window dryer vent adapter I share this in case someone finds it useful. This is a straightforward tumble dryer hose attachment to allow it to be held by a window or similar. It is designed with a 4" hose in mind (common on a tumble dryer,…
Window dryer vent adapter I share this in case someone finds it useful. This is a straightforward tumble dryer hose attachment to allow it to be held by a window or similar. It is designed with a 4" hose in mind (common on a tumble dryer,…
This is a very dirty and easy hack to make your air condition more efficient. How does it work? In general mono block air conditioners suck the air of the room, cool it and a part of the sucked air is pumped to the outer world as hot air.…
Midea Air Conditioner Remote Control Wall Mount
Air Conditioner Deflector 10.09.2025 Update 1 - Not Printed (gcode time and weight to be updated after print) Designed using the Tinkercad application. Note: Parts are oriented as viewed from the front 01 - Right Arm Upper (M.C. Langer -…
This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The…
