Metabo TS 254 / TS 254 M miter slot runner featherboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Metabo TS 254 / TS 254 M miter slot runner featherboard
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Metabo TS 254 / TS 254 M miter slot runner featherboard
I’ve also designed Metabo TS 254 / TS 254 M rip fence featherboard add-on; you can find them here.
The 'feathers' on the featherboard are slightly recessed on the underside, marked as 'down'. This ensures good mobility and prevents them from getting caught on the table.
On the printplate the side marked 'down' must be upwards!
Parts list:
- 2 x hex head bolts M6 x 35 mm (min length)
- 2 x M6 hex nuts
- 2 x washers for the knobs with an outer diameter of 20 mm
You can also use the knobs with smaller washers or without any shims at all.
With the larger washers, you can tighten them more securely, and there won't be any marks left behind.
The hex recesses are very tight; if necessary, insert the screws and nuts with a little pressure.
Printed with:
Spectrum Premium PLA Tooling Dark Green
Spectrum / The Filament HT-PLA Tooling Dark Green (use brim ! ; tends to warp)
The color is very close to Metabo green.
Print settings:
For the knobs, I selected a sacrificial layer for counterbore holes
- Nozzle 0.4
- Layer height 0.28
- 4 walls, 10% rectilinear infill
included STEP files to easy modify
happy printing, have fun!
IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE