1 / 5
Metabo TS 254 / TS 254 M miter slot runner featherboard — image 1
1 / 5

Metabo TS 254 / TS 254 M miter slot runner featherboard

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Metabo TS 254 / TS 254 M miter slot runner featherboard

Rating
5 / 5
Likes
17
Downloads
94
Makes
0
Views
319
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Metabo TS 254 / TS 254 M miter slot runner featherboard

I’ve also designed Metabo TS 254 / TS 254 M rip fence featherboard add-on; you can find them here.

The 'feathers' on the featherboard are slightly recessed on the underside, marked as 'down'. This ensures good mobility and prevents them from getting caught on the table.
On the printplate the side marked 'down' must be upwards!

Parts list:
- 2 x hex head bolts M6 x 35 mm (min length)
- 2 x M6 hex nuts
- 2 x washers for the knobs with an outer diameter of 20 mm
You can also use the knobs with smaller washers or without any shims at all.
With the larger washers, you can tighten them more securely, and there won't be any marks left behind.

The hex recesses are very tight; if necessary, insert the screws and nuts with a little pressure.

Printed with:
Spectrum Premium PLA Tooling Dark Green
Spectrum  / The Filament HT-PLA Tooling Dark Green (use brim ! ; tends to warp)
The color is very close to Metabo green.

Print settings:
For the knobs, I selected a sacrificial layer for counterbore holes
- Nozzle 0.4
- Layer height 0.28 
- 4 walls, 10% rectilinear infill

included STEP files to easy modify

happy printing, have fun!

IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE

Tags