Desktop speaker stand for Edifier S350DB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic speaker stand for Edifier S350DB bookshelf speakers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Basic desktop speaker stand for Edifier S350DB bookshelf speakers, nothing existed for what I wanted so I quickly threw this together.
This raises the speakers 130mm off the surface but I may revise this and make them taller as they aren't quite where I want.
I printed these in PLA and they've been fine though I would recommend at least 30% gyroid infill, possibly even more than that - despite their size, the speakers are really heavy and the first print which was at 20% infill just wasn't stable enough with the weight on it.
I printed with 5 top and bottom shell layers and 5 wall loops at 0.20mm layer height, though if you want them to present better, I'd use a smaller layer height as the curves are a little stepped at that height.